EverFocus EAN850A user manual Audio

Page 42

EAN850A

4.5 Audio

The EAN850A camera can transmit audio to other clients using a built-in microphone or connecting to external microphone to play audio received from other clients via connected speakers. This section describes how to configure the basic audio settings.

Audio

Check Enable Audio box to enable audio function.

Audio Input: Audio from an internal microphone or a line source can be connected to the Audio connector of EAN850A. The audio source can be selected from Internal Microphone, External Audio Input L and External Audio Input R.

Note: Microphone is not available for U.S. region.

Audio Input volume: Adjust the Audio Input Volume for the audio input devices connected to the camera if there are problems with the sound input being too low or high.

Press Apply to apply the setting changes or Reset to reset without saving the change.

42

Page 41 Page 43
Image 42
Page 41 Page 43
Contents EAN850A EAN850A Safety Notice EAN850A About this documentTerms and Trademark SupportAbout AC Adaptor Table of Contents EAN850A Introduction Accessing the Camera Menu EAN850A EAN850A EAN850A Setting Information2 Log User Config EAN850A Network NetworkSubnet Mask IP TypeIP address GatewayUsername PasswordEAN850A Secondary DNS Http PortDdns Bandwidth SMTP/FTP EAN850A Network Alarm reserved for PowerCon VideoMulti Streaming Camera SET button EAN850A 4.4.2.1 Lens ShutterESC Reserved White Balance ControlSetup EAN850A 4.4.2.4 Backlight AGC Auto Gain ControlEAN850A 4.4.2.6 DNR Dynamic Noise Reduction SENS-UPEAN850A EAN850A 4.4.2.8 Special Color ADJ Adjust the Color Gain from 0 ~ Motion Detection AREA1 AREA2 AREA3 AREA4 EAN850A Privacy TOP EAN850A Special Camera ID OFF Sharpness Color ADJ Level Exit Audio User Event Event EAN850A Motion Alarm Time Mask EAN850A System Date/TimeEAN850A Daylight Saving SD Card Indication Description Maintenance BrowseEAN850A Specifications Local Storage Europe Office Head Office China OfficeUSA Office USA N.Y. Office
Top Page Image Contents