EverFocus EAN850A user manual

Page 46

EAN850A

or button to move between events. The event that has

highest priority will be activated first.

Press Apply to apply the setting changes or Reset to reset without saving the change.

This example describes how to set the camera to upload images to FTP when someone press Manual trigger button:

1.Click button in Event page.

2.Enter an event name for the event, e.g. Event 1

3.Select “Manual Trigger” as event type.

4.Select “Upload to FTP” as action type.

5.Check “Enable Pre-alarm Buffer” and “Enable Post-alarm Buffer”. For pre-and

46

Image 46
Contents EAN850A EAN850A Safety Notice EAN850A About this documentSupport Terms and TrademarkAbout AC Adaptor Table of Contents EAN850A Introduction Accessing the Camera Menu EAN850A EAN850A EAN850A Setting Information2 Log User Config EAN850A Network NetworkSubnet Mask IP TypeIP address GatewayUsername PasswordEAN850A Secondary DNS Http PortDdns Bandwidth SMTP/FTP EAN850A Network Alarm reserved for PowerCon VideoMulti Streaming Camera SET button EAN850A 4.4.2.1 Lens ShutterESC Reserved White Balance ControlSetup EAN850A 4.4.2.4 Backlight AGC Auto Gain ControlEAN850A 4.4.2.6 DNR Dynamic Noise Reduction SENS-UPEAN850A EAN850A 4.4.2.8 Special Color ADJ Adjust the Color Gain from 0 ~ Motion Detection AREA1 AREA2 AREA3 AREA4 EAN850A Privacy TOP EAN850A Special Camera ID OFF Sharpness Color ADJ Level Exit Audio User Event Event EAN850A Motion Alarm Time Mask EAN850A System Date/TimeEAN850A Daylight Saving SD Card Indication Description Maintenance BrowseEAN850A Specifications Local Storage Europe Office Head Office China OfficeUSA Office USA N.Y. Office