EverFocus EZ610 manual Special

Page 25

3.3.7 SPECIAL

In this section, user can do special settings including camera title, digital effects, motion, privacy zones, synchronization and language.

Please direct the arrow to point to “SPECIAL” on the SETUP menu by using the UP and DOWN buttons.

Select the mode you would like to operate by pressing the LEFT or RIGHT button.

3.3.7.1 CAM TITLE

Input the camera title, and it will be appeared on the monitor.

Please direct the arrow to point to “CAM TITLE” by using the UP or DOWN button. Select “ON” by pressing the LEFT or RIGHT button.

Press SETUP button.

Maximum 15 characters can be used for the ID.

Use UP, DOWN, LEFT and RIGHT buttons to move the cursor to the letter to be chosen. Use SETUP button to choose that letter.

Once a name has been selected, please choose a position where you would like to display the name.

Move the cursor onto “POS” and press the SETUP button. The name will appear at the top left hand corner.

Please use the 4 directional buttons to move the position of the displayed name. Press the SETUP button when the desired location has been reached.

If you would like to cancel the ID entered, please move the cursor to “CLR”, and all the letters entered will be deleted.

Select “END” and press the SETUP button to complete ID input.

25

Image 25
Contents EZ610 Operation Instruction Precautions WEE Federal Communication Commission Interference StatementTable of Contents OSD Menu Setting by Keyboard Lens Adjustment by Keyboard Product Overview FeaturesAccessory Parts List 3D-DNR SpecificationsCamera Body DimensionsFront view of EZ610 Related Products Camera Component DescriptionWiring and Mounting InstallationRS-485 cable 1st axis Adjust Camera Position2nd axis Sunshield 3rd axisSteps Control Key General Operation GuideReturn to Previous RS485 ID & Baud Rate SettingClose the Host Menu Screen Baud rate RS-485 IDOSD Menu Tree OSD Menu SetupOff INT / LL English Exposure LensBLC DefaultGain LEFT/RIGHTOFF LevelIndoor OutdoorAWB ATWAWC -SET ManualEnables 3DNR to reduce the noise. default Disables 3DNR to keep the same amount of noiseLevel Noise reduction level from 0~100. default=30 6 3DNRSpecial Flip MirrorRotate PanArea Display Area SelectSensitivity Motion ViewINT AdjustReset RS 485 Wiring Remote control with EKB-500 keyboardOSD Menu Setting by Keyboard Lens Adjustment by Keyboard Remote Control with EverFocus DVR1 RS-485 Wiring Camera Operation and Setup by DVREverFocus Electronics Corp