EverFocus EZ610 manual Mirror, Flip, Rotate, Pan, Tilt

Page 26

3.3.7.2D-EFFECT

3.3.7.3FREEZE

OFF

Select “OFF” to view live image.

ON

Select “ON” to freeze and display current live image.

3.3.7.4 MIRROR

 

OFF

Disable digital effects.

MIRROR

The image is displayed horizontal flipped.

V-FLIP

The image is displayed vertical flipped.

ROTATE

Rotate the image 180˚.

3.3.7.5D-ZOOM Setup for digital zoom.

OFF

Disable the D-ZOOM function

ON

D-Zoom:Select digital zoom from X1.0 up to X32. Note that zoom levels

 

 

above X4 may lead to excessive pixellation.

 

Setup of the position of the magnified image in view (0 is the center of the

 

image):

 

 

Pan:

Select digital pan from -100 to 100.

 

Tilt:

Select digital tilt from -100 to 100.

Press “RET” to saves all settings in D-ZOOM menu and returns to the previous menu. Press “END” to save all the setting menus and exit.

3.3.7.6 GAMMA

This menu allows adjustment of gamma correction for ideal linearity of image brightness and contrast in the range 0.05 to 1.0.

3.3.7.7 NEG. IMAGE

Allows user to create a negative of the original image. A negative image is a tonal inversion of a positive image, in which light areas appear dark and vice versa. A negative color image is additionally color reversed, with red areas appearing cyan, greens appearing magenta and blues appearing yellow.

26

Image 26
Contents EZ610 Operation Instruction Precautions Federal Communication Commission Interference Statement WEETable of Contents OSD Menu Setting by Keyboard Lens Adjustment by Keyboard Features Product OverviewAccessory Parts List Specifications 3D-DNRFront view of EZ610 DimensionsCamera Body Camera Component Description Related ProductsInstallation Wiring and MountingRS-485 cable 2nd axis Adjust Camera Position1st axis 3rd axis SunshieldControl Key General Operation Guide StepsClose the Host Menu Screen RS485 ID & Baud Rate SettingReturn to Previous Baud rate RS-485 IDOSD Menu Setup OSD Menu TreeOff INT / LL English Lens ExposureGain DefaultBLC LEFT/RIGHTIndoor LevelOFF OutdoorAWC -SET ATWAWB ManualLevel Noise reduction level from 0~100. default=30 Disables 3DNR to keep the same amount of noiseEnables 3DNR to reduce the noise. default 6 3DNRSpecial Rotate MirrorFlip PanSensitivity Area SelectArea Display Motion ViewAdjust INTReset OSD Menu Setting by Keyboard Remote control with EKB-500 keyboardRS 485 Wiring 1 RS-485 Wiring Remote Control with EverFocus DVRLens Adjustment by Keyboard Camera Operation and Setup by DVREverFocus Electronics Corp