EverFocus EZ610 manual Adjust, Int

3.3.7.11 SYNC

There are two SYNCHRONIZATION modes INTERNAL and LINE-LOCK. In LINE-LOCK mode, the video signal is synchronized to the frequency of the incoming AC power. The Line-Lock synchronization can only be used when the supply power is 24VAC 60Hz (NTSC models) or 50Hz (PAL models).

INT	Internal synchronization
L/L	Line-lock synchronization (only for 24 VAC)

3.3.7.12 LANGUAGE

Select OSD language. EZ610 camera supports multiple languages including English, Japanese, Traditional Chinese and Simplified Chinese.

3.3.7.13 RETURN

Press “RET” to save all settings in the SPECIAL menu and return to the previous menu. Press “END” to save all the menu settings and exit.

3.3.8 ADJUST

Adjust sharpness, Blue and Red level in this section.

3.3.8.1 SHARPNESS

The contour of the video image becomes cleaner and more easily distinguished as the level of SHARPNESS increases. If the level is set too high, it may affect the video image and cause noise. The available range of level is 0~31.

3.3.8.2 BLUE

Adjust image’s blue level. The available range of level is 0~100.

3.3.8.3 RED

Adjust image’s red level. The available range of level is 0~100.

Press “RET” to saves all settings in the ADJUST menu and returns to the previous menu. Press “END” to save all the menu settings and exit.

28