LEVEL | Adjust the sensitivity level for HSBLC from 0 to 8. |
DEFAULT | Set the factory default values for HSBLC. |
LEFT/RIGHT | Set the Left/Right side of an area for the HSBLC to be adjusted. The value |
| adjustable is 0~6. |
WIDTH | Set the width of an area for the HSBLC to be adjusted. The value adjustable is |
| 0~6. |
TOP/BOTTOM | Set the Top/Bottom side of an area for the HSBLC to be adjusted. The value |
| adjustable is 0~6. |
HEIGHT | Set the height of an area for the HSBLC to be adjusted. The value adjustable |
| is 0~6. |
RETURN | Press “RET” to save all settings in the HSBLC menu and return to the previous |
| menu. |
| Press “END” to save all the menu settings and exit. |
3.3.3.5
When there are both bright and dark areas at same time, this function can help make both areas more evenly exposed.
1.Please direct the arrow to point to
2.Select the mode you would like to operate by moving the joystick LEFT or RIGHT.
OFF | Disables |
INDOOR | Select this option if you are in an indoor environment. |
OUTDOOR | Select this option if you are in an outdoor environment. |
Return | Press “RET” to save all settings in the Exposure menu and return to the |
| previous menu. |
| Press “END” to save all the menu settings and exit. |
3.3.4 WHITE BALANCE CONTROL
The screen color can be adjusted by using the WHITE BALANCE function.
Please direct the arrow to point to “WHITE BAL” by using the UP and DOWN buttons. Please select the mode you would like to operate by pressing the LEFT or RIGHT button.
Please select one of the 6 modes below:
22