UTP Receivers |
|
|
|
|
|
7631 | Receiver, converts UTP video to composite up to 500 ft from transmitter | |
|
|
|
6518 | Receiver, converts UTP video to composite up to 1000 ft from transmitter | |
|
|
|
| 7453 | Receiver, converts UTP video to composite up to 3000 ft from transmitter (does |
|
| not support Vicoax systems) |
7648 | ||
|
| each transmitter |
6519 | ||
|
| each transmitter (does not support Vicoax systems) |
Installation
Unpacking and Inspection
All Vicon equipment is tested and inspected before leaving the factory. It is the carrier’s responsibility to deliver the equipment in the same condition as it left the factory.
Inspection for Visible Damage
Immediately inspect the cartons upon delivery. Make a note of any visible damage on all copies of the carrier’s freight bill. Make sure the carrier’s agent (the person making the delivery) signs the note on all copies of the bill. If the agent does not have claim forms, contact the carrier’s office.
Inspection for Concealed Damage
As soon as possible after delivery, unpack the unit and inspect it for concealed damage. Do not discard the carton or packing materials. If the unit is damaged, contact the carrier immediately and request forms for filing a damage claim. Make arrangements for a representative of the carrier to inspect the damaged equipment. If the equipment must be returned for repair, follow the Shipping Instructions at the end of this manual.
2 • Installation |