Nikon XX152-02-00 Operation, Maintenance, Care and Cleaning of Lower Dome, Fuse Replacement

Page 27

Operation

When power is applied to the camera, the SurveyorVFT fixed dome views the selected scene.

Maintenance

The SurveyorVFT Fixed Camera Dome requires no scheduled maintenance except for the occasional cleaning of the lower dome.

Care and Cleaning of Lower Dome

1.Always handle the lower dome by the flange and avoid touching the inside surface.

2.If dust or other contaminants accumulate in the dome’s interior, they should be removed with clean dry air pressure (compressed air cans).

3.If spots, streaks or stains appear on the interior or exterior, they can be removed with a solution isopropyl alcohol and water using a microwave-safe (aluminum free) paper towel. Dry with clean, dry pressurized air.

4.Scratches or surface blemishes on the exterior or interior may be removed with a nonabrasive wax using a soft nonabrasive cleaning cloth. Either liquid or spray cleaner/wax suitable for fine furniture is acceptable.

Caution: Excessive rubbing of the dome’s surface can cause permanent scratches that may render the dome unusable.

5. Clean all surfaces with any soft nonabrasive cleaning cloth and cleaning agent suitable for acrylic plastic.

Caution: For warranty protection, implement this instruction exactly as stated.

Fuse Replacement

There is a fuse located in the SurveyorVFT. When necessary, replace it with a fuse of the same value, 0.5 A, 250 V, 5x20 mm slo blo for indoor version; the outdoor version has an additional 1.0 A, 250 V, 5x20 mm slo blo fuse.

XX152-02-00 Rev 1004 SurveyorVFT Fixed Camera Dome

Operation 17

Image 27
Contents Fixed Camera Dome XX152-02-00Page FCC Notice Graphic Symbol Explanation SafeguardsContents In-Ceiling No Access to Ceiling Quick InstallationIn-Ceiling Access to Ceiling Pendant Indoor Pendant Outdoor Page Models, Product Codes and Descriptions IntroductionInspection for Concealed Damage InstallationUnpacking and Inspection Inspection for Visible DamageEnclosure SurveyorVFT Fixed Dome ComponentsMounting the Unit In-Ceiling MountingUse of the Scribe Mounting from Above the Ceiling Safety Cord InstallationOptional Independent Support Installation of Optional In-Ceiling Mounting KitIndoor Pendant Twisted-Pair Video Cable Cable ConnectionsOutdoor Pendant Coaxial Video CableCamera Power Connections DIP Switch Settings Autoiris AdjustmentsCamera Synchronization Potentiometer/DIP Switch Location DIP Switch Settings Final Installation Camera/Lens Adjustments 5-50 mm Version ShownIn-Ceiling In-Ceiling Mount Final Installation Camera Mounting Bracket Adjustment 2.6-6 mm Version ShownPendant Mount Dome Final Installation Outdoor Pendant Disassembly In-Ceiling InstallationPendant Installation Operation MaintenanceCare and Cleaning of Lower Dome Fuse ReplacementShipping Instructions Inch Pipe Designation ReferenceBelden1721X 24, Solid Polyethylene Bare Copper 100 Wire DistancesTwisted-Pair Cable Twisted PairsTechnical Information Storage Temperature Range Dimensions In-CeilingWeight Operating TemperatureCamera Specifications Model Focal Length Field-of-View Horizontal Vertical Lens SpecificationsVicon Standard Equipment Warranty Far East Office Corporate HeadquartersVicon Europe Headquarters Brussels Office