Nikon XX152-02-00 specifications Camera Mounting Bracket Adjustment 2.6-6 mm Version Shown

Figure 8

Camera Mounting Bracket Adjustment – 2.6-6 mm Version Shown

Insert the clip of the safety cord on the lower dome into the hole in the enclosure. Refer to label in the enclosure. Lift the lower dome up to the SurveyorVFT and align the molded tabs on the lower dome with the recesses on the inner enclosure. Press the lower dome into the SurveyorVFT and verify that it snaps into place on both sides. The upper edge of the lower dome should be flush with the ceiling plane. Refer to Figure 9.

Figure 9

In-Ceiling Mount Final Installation

XX152-02-00 Rev 1004 SurveyorVFT Fixed Camera Dome Installation • 13