Olympus 80S manual Checking the Batteries

Page 13

CHECKING THE BATTERIES

Open the lens barrier until you feel a click.

Display: lights (and turns

off automatically).

Meaning: Batteries are OK. You can shoot.

Display: blinks and other

indicators are displayed normally.

Meaning: Battery power is low

and battery should be replaced.

Display: blinks and other indicators go out.

Meaning: Batteries are dead and

should be replaced immediately.

13

Image 13

Contents Accura Zoom 80S Read this manual carefully before using your cameraIndicates Never Attempt to Page Using the RC-200 remote control Viewfinder Names of PartsPage Viewfinder Display Viewfinder Display LCD PanelLCD Panel Attach the strap as shown Immediately Loading the BatteryFrom making electrical contact. To avoid this, wipe both Checking the Batteries Film Proper Shutter ReleaseLoading the Film Make sure the film is lying flat CorrectIncorrect Push the film cartridge gently toOpen the lens barrier until Align the film leader with the mark , and close Back coverExposure counter on the LCD panel reads Open the lens barrier until you feel a click Taking PicturesActivate. Release your finger Page How to Use the Zoom Lever Position the autofocus mark on your subject Lights. Exposure also will be Adjusted automaticallyDepress the shutter release button halfway to Autofocus accuracyAutofocus windows and flash Workingdistance0.6m2ft~ Infinity Depress the shutter release button fully to take the pictureClose-up Correction Try to keep the lens barrier closed After ShootingAfter the motor stops UnloadingthefilmRemove the film Rewinding the film before the end of the rollSetting the Modes Using the Flash ModesYour purpose Fill-In Flash Forced Mode pSubjects are close Flash fires automatically in dark places Auto FlashFlash Working Range with RED EYE Reducing Flash Red-eye reduction may not be effective when the subjectFlashes Is too far from the cameraOne second OFF Flash Override Lens barrier restores the Auto Flash modeTwilight or night scenes When you want the flash to fire for each shot Display SelftimerLights Locked when the shutter To cancel this mode, press Using the RC-200 RemotePress the button to display Light near the camera A width of 6 ~ 12.5 mm 0.23 ~ 0.42 Open the buckle Insert Strap Close BuckleHandling Cautions Replacing the BatteryPress the SET button to correct the year Press the Mode button for two seconds or longerYear indication will start blinking Repeat steps 2 and 3 to set the day, hour and minutes Press the Mode button againMonth indication will start blinking Pressed againMake sure to correct the data Quartzdate models onlyNo data Year-month-day Month-day-yearDay-month-year Day-hour-minute Do not leave the camera in any Care and StorageSunlight for example, in a Car or on the beach If the camera gets wet, wipe itDo not expose the camera to Temperatures, even within thisDo not apply excessive force to When transporting the camera From a cold place to a warm Page Specifications Metering. Auto exposure Range Wide angle EV Ft ~ infinity Exposure control ProgrammedBacklight control +1.5 EV Next lower speed. For non DX-coded film and film with 800, 1600 and 3200. FilmAutomatic rewind stop ~ 12.5 ft with ISO 400 color negative film Normal temperature withDimensions 116.5 W x 62 H Film speed setting Automatic calendar system Up to year Specifications for Date UnitDay-hour-minute External indication of data Data X 1.7 x 0.5 Specifications for RC-200CZ9504