Olympus 80S Using the RC-200 Remote, Press the button to display, To cancel this mode, press

Page 35

USING THE RC-200 REMOTE

CONTROL (optional)

1.Press the button to display

To cancel this mode, press the

button again. This mode is canceled automatically when not used for more than 20 minutes.

2.Aim the remote control at the camera, and press the button. The shutter will be released after about 3 seconds.

35

Image 35

Contents Accura Zoom 80S Read this manual carefully before using your cameraIndicates Never Attempt to Page Using the RC-200 remote control Viewfinder Names of PartsPage Viewfinder Display Viewfinder Display LCD PanelLCD Panel Attach the strap as shown Immediately Loading the BatteryFrom making electrical contact. To avoid this, wipe both Checking the Batteries Film Proper Shutter ReleaseLoading the Film Push the film cartridge gently to CorrectMake sure the film is lying flat IncorrectExposure counter on the LCD panel reads Align the film leader with the mark , and close Back coverOpen the lens barrier until Activate. Release your finger Taking PicturesOpen the lens barrier until you feel a click Page How to Use the Zoom Lever Autofocus accuracy Lights. Exposure also will be Adjusted automaticallyPosition the autofocus mark on your subject Depress the shutter release button halfway toAutofocus windows and flash Workingdistance0.6m2ft~ Infinity Depress the shutter release button fully to take the pictureClose-up Correction Try to keep the lens barrier closed After ShootingRewinding the film before the end of the roll UnloadingthefilmAfter the motor stops Remove the filmYour purpose Using the Flash ModesSetting the Modes Subjects are close Mode pFill-In Flash Forced Flash Working Range with Auto FlashFlash fires automatically in dark places Is too far from the camera Red-eye reduction may not be effective when the subjectRED EYE Reducing Flash FlashesOne second Twilight or night scenes Lens barrier restores the Auto Flash modeOFF Flash Override When you want the flash to fire for each shot Lights SelftimerDisplay Locked when the shutter Press the button to display Using the RC-200 RemoteTo cancel this mode, press Light near the camera A width of 6 ~ 12.5 mm 0.23 ~ 0.42 Open the buckle Insert Strap Close BuckleHandling Cautions Replacing the BatteryYear indication will start blinking Press the Mode button for two seconds or longerPress the SET button to correct the year Pressed again Press the Mode button againRepeat steps 2 and 3 to set the day, hour and minutes Month indication will start blinkingMake sure to correct the data Quartzdate models onlyDay-month-year Day-hour-minute Month-day-yearNo data Year-month-day If the camera gets wet, wipe it Care and StorageDo not leave the camera in any Sunlight for example, in a Car or on the beachDo not apply excessive force to Temperatures, even within thisDo not expose the camera to When transporting the camera From a cold place to a warm Page Specifications Backlight control +1.5 EV Ft ~ infinity Exposure control ProgrammedMetering. Auto exposure Range Wide angle EV Next lower speed. For non DX-coded film and film with 800, 1600 and 3200. FilmAutomatic rewind stop ~ 12.5 ft with ISO 400 color negative film Normal temperature withDimensions 116.5 W x 62 H Day-hour-minute External indication of data Data Specifications for Date UnitFilm speed setting Automatic calendar system Up to year X 1.7 x 0.5 Specifications for RC-200CZ9504