Olympus 80S Press the Mode button for two seconds or longer, Year indication will start blinking

Page 39

CORRECTING THE DATA (for QUARTZDATE models only)

1.Press the MODE button for two seconds or longer.

The year indication will start blinking.

Caution: Do not press the button with a pointed object such as the tip of a mechanical pencil.

2.Press the SET button to correct the year.

If you press the button once, the number on the display will advance by 1. And if you keep it pressed, the numbers will run in rapid succession.

39

Image 39

Contents Accura Zoom 80S Read this manual carefully before using your cameraIndicates Never Attempt to Page Using the RC-200 remote control Viewfinder Names of PartsPage Viewfinder Display Viewfinder Display LCD PanelLCD Panel Attach the strap as shown Immediately Loading the BatteryFrom making electrical contact. To avoid this, wipe both Checking the Batteries Film Proper Shutter ReleaseLoading the Film Push the film cartridge gently to CorrectMake sure the film is lying flat IncorrectAlign the film leader with the mark , and close Back cover Open the lens barrier untilExposure counter on the LCD panel reads Taking Pictures Open the lens barrier until you feel a clickActivate. Release your finger Page How to Use the Zoom Lever Autofocus accuracy Lights. Exposure also will be Adjusted automaticallyPosition the autofocus mark on your subject Depress the shutter release button halfway toAutofocus windows and flash Workingdistance0.6m2ft~ Infinity Depress the shutter release button fully to take the pictureClose-up Correction Try to keep the lens barrier closed After ShootingRewinding the film before the end of the roll UnloadingthefilmAfter the motor stops Remove the filmUsing the Flash Modes Setting the ModesYour purpose Mode p Fill-In Flash ForcedSubjects are close Auto Flash Flash fires automatically in dark placesFlash Working Range with Is too far from the camera Red-eye reduction may not be effective when the subjectRED EYE Reducing Flash FlashesOne second Lens barrier restores the Auto Flash mode OFF Flash OverrideTwilight or night scenes When you want the flash to fire for each shot Selftimer DisplayLights Locked when the shutter Using the RC-200 Remote To cancel this mode, pressPress the button to display Light near the camera A width of 6 ~ 12.5 mm 0.23 ~ 0.42 Open the buckle Insert Strap Close BuckleHandling Cautions Replacing the BatteryPress the Mode button for two seconds or longer Press the SET button to correct the yearYear indication will start blinking Pressed again Press the Mode button againRepeat steps 2 and 3 to set the day, hour and minutes Month indication will start blinkingMake sure to correct the data Quartzdate models onlyMonth-day-year No data Year-month-dayDay-month-year Day-hour-minute If the camera gets wet, wipe it Care and StorageDo not leave the camera in any Sunlight for example, in a Car or on the beachTemperatures, even within this Do not expose the camera toDo not apply excessive force to When transporting the camera From a cold place to a warm Page Specifications Ft ~ infinity Exposure control Programmed Metering. Auto exposure Range Wide angle EVBacklight control +1.5 EV Next lower speed. For non DX-coded film and film with 800, 1600 and 3200. FilmAutomatic rewind stop ~ 12.5 ft with ISO 400 color negative film Normal temperature withDimensions 116.5 W x 62 H Specifications for Date Unit Film speed setting Automatic calendar system Up to yearDay-hour-minute External indication of data Data X 1.7 x 0.5 Specifications for RC-200CZ9504