Olympus 80S manual After Shooting, Try to keep the lens barrier closed

Page 24

AFTER SHOOTING

1.Close the lens barrier slowly and carefully. The lens will retract automatically.

2.Close the lens barrier completely.

Caution: Do not forcibly close the lens barrier as it will interfere with lens retraction.

Note: The power is turned off

automatically after 4.5 hours. When the camera is not in use,

try to keep the lens barrier closed.

24

Image 24

Contents Read this manual carefully before using your camera Accura Zoom 80SIndicates Never Attempt to Page Using the RC-200 remote control Names of Parts ViewfinderPage Viewfinder Display LCD Panel Viewfinder DisplayLCD Panel Attach the strap as shown Loading the Battery ImmediatelyFrom making electrical contact. To avoid this, wipe both Checking the Batteries Proper Shutter Release FilmLoading the Film Correct Make sure the film is lying flatIncorrect Push the film cartridge gently toAlign the film leader with the mark , and close Back cover Open the lens barrier untilExposure counter on the LCD panel reads Taking Pictures Open the lens barrier until you feel a clickActivate. Release your finger Page How to Use the Zoom Lever Lights. Exposure also will be Adjusted automatically Position the autofocus mark on your subjectDepress the shutter release button halfway to Autofocus accuracyDepress the shutter release button fully to take the picture Autofocus windows and flash Workingdistance0.6m2ft~ InfinityClose-up Correction After Shooting Try to keep the lens barrier closedUnloadingthefilm After the motor stopsRemove the film Rewinding the film before the end of the rollUsing the Flash Modes Setting the ModesYour purpose Mode p Fill-In Flash ForcedSubjects are close Auto Flash Flash fires automatically in dark placesFlash Working Range with Red-eye reduction may not be effective when the subject RED EYE Reducing FlashFlashes Is too far from the cameraOne second Lens barrier restores the Auto Flash mode OFF Flash OverrideTwilight or night scenes When you want the flash to fire for each shot Selftimer DisplayLights Locked when the shutter Using the RC-200 Remote To cancel this mode, pressPress the button to display Light near the camera Open the buckle Insert Strap Close Buckle A width of 6 ~ 12.5 mm 0.23 ~ 0.42Replacing the Battery Handling CautionsPress the Mode button for two seconds or longer Press the SET button to correct the yearYear indication will start blinking Press the Mode button again Repeat steps 2 and 3 to set the day, hour and minutesMonth indication will start blinking Pressed againQuartzdate models only Make sure to correct the dataMonth-day-year No data Year-month-dayDay-month-year Day-hour-minute Care and Storage Do not leave the camera in anySunlight for example, in a Car or on the beach If the camera gets wet, wipe itTemperatures, even within this Do not expose the camera toDo not apply excessive force to When transporting the camera From a cold place to a warm Page Specifications Ft ~ infinity Exposure control Programmed Metering. Auto exposure Range Wide angle EVBacklight control +1.5 EV 800, 1600 and 3200. Film Next lower speed. For non DX-coded film and film withAutomatic rewind stop Normal temperature with ~ 12.5 ft with ISO 400 color negative filmDimensions 116.5 W x 62 H Specifications for Date Unit Film speed setting Automatic calendar system Up to yearDay-hour-minute External indication of data Data Specifications for RC-200 X 1.7 x 0.5CZ9504