Olympus 80S manual Replacing the Battery, Handling Cautions

Page 38

Replacing the Battery

1.Open the buckle and remove the battery cover inside by sliding in the direction of the arrow.

2.Insert a new battery (CR1220) with the plus mark showing on top .

3.Attach the battery cover

by sliding in the direction of the arrow .

4.Close the buckle .

Handling Cautions

Never apply excessive force to the remote control when attached to the strap.

Usable temperature range:

-10°C ~ 40°C (14°F ~ 104°F).

38

Image 38

Contents Read this manual carefully before using your camera Accura Zoom 80SIndicates Never Attempt to Page Using the RC-200 remote control Names of Parts ViewfinderPage Viewfinder Display LCD Panel Viewfinder DisplayLCD Panel Attach the strap as shown Loading the Battery ImmediatelyFrom making electrical contact. To avoid this, wipe both Checking the Batteries Proper Shutter Release FilmLoading the Film Incorrect CorrectMake sure the film is lying flat Push the film cartridge gently toExposure counter on the LCD panel reads Align the film leader with the mark , and close Back coverOpen the lens barrier until Activate. Release your finger Taking PicturesOpen the lens barrier until you feel a click Page How to Use the Zoom Lever Depress the shutter release button halfway to Lights. Exposure also will be Adjusted automaticallyPosition the autofocus mark on your subject Autofocus accuracyDepress the shutter release button fully to take the picture Autofocus windows and flash Workingdistance0.6m2ft~ InfinityClose-up Correction After Shooting Try to keep the lens barrier closedRemove the film UnloadingthefilmAfter the motor stops Rewinding the film before the end of the rollYour purpose Using the Flash ModesSetting the Modes Subjects are close Mode pFill-In Flash Forced Flash Working Range with Auto FlashFlash fires automatically in dark places Flashes Red-eye reduction may not be effective when the subjectRED EYE Reducing Flash Is too far from the cameraOne second Twilight or night scenes Lens barrier restores the Auto Flash modeOFF Flash Override When you want the flash to fire for each shot Lights SelftimerDisplay Locked when the shutter Press the button to display Using the RC-200 RemoteTo cancel this mode, press Light near the camera Open the buckle Insert Strap Close Buckle A width of 6 ~ 12.5 mm 0.23 ~ 0.42Replacing the Battery Handling CautionsYear indication will start blinking Press the Mode button for two seconds or longerPress the SET button to correct the year Month indication will start blinking Press the Mode button againRepeat steps 2 and 3 to set the day, hour and minutes Pressed againQuartzdate models only Make sure to correct the dataDay-month-year Day-hour-minute Month-day-yearNo data Year-month-day Sunlight for example, in a Car or on the beach Care and StorageDo not leave the camera in any If the camera gets wet, wipe itDo not apply excessive force to Temperatures, even within thisDo not expose the camera to When transporting the camera From a cold place to a warm Page Specifications Backlight control +1.5 EV Ft ~ infinity Exposure control ProgrammedMetering. Auto exposure Range Wide angle EV 800, 1600 and 3200. Film Next lower speed. For non DX-coded film and film withAutomatic rewind stop Normal temperature with ~ 12.5 ft with ISO 400 color negative filmDimensions 116.5 W x 62 H Day-hour-minute External indication of data Data Specifications for Date UnitFilm speed setting Automatic calendar system Up to year Specifications for RC-200 X 1.7 x 0.5CZ9504