Olympus 80S manual Align the film leader with the mark , and close Back cover

Page 17

3.Align the film leader with the mark , and close the

back cover.

The film automatically

advances to the first frame.

The film does not overlap any

of the positioning guides . Then close the back cover.

4. Open the lens barrier until

you feel a click.

The exposure counter on the LCD panel reads

Note: If blinks in the exposure

counter, the film is improperly loaded. Reload the film.

17

Image 17

Contents Accura Zoom 80S Read this manual carefully before using your cameraIndicates Never Attempt to Page Using the RC-200 remote control Viewfinder Names of PartsPage Viewfinder Display Viewfinder Display LCD PanelLCD Panel Attach the strap as shown Immediately Loading the BatteryFrom making electrical contact. To avoid this, wipe both Checking the Batteries Film Proper Shutter ReleaseLoading the Film Make sure the film is lying flat CorrectIncorrect Push the film cartridge gently toExposure counter on the LCD panel reads Align the film leader with the mark , and close Back coverOpen the lens barrier until Activate. Release your finger Taking PicturesOpen the lens barrier until you feel a click Page How to Use the Zoom Lever Position the autofocus mark on your subject Lights. Exposure also will be Adjusted automaticallyDepress the shutter release button halfway to Autofocus accuracyAutofocus windows and flash Workingdistance0.6m2ft~ Infinity Depress the shutter release button fully to take the pictureClose-up Correction Try to keep the lens barrier closed After ShootingAfter the motor stops UnloadingthefilmRemove the film Rewinding the film before the end of the rollYour purpose Using the Flash ModesSetting the Modes Subjects are close Mode pFill-In Flash Forced Flash Working Range with Auto FlashFlash fires automatically in dark places RED EYE Reducing Flash Red-eye reduction may not be effective when the subjectFlashes Is too far from the cameraOne second Twilight or night scenes Lens barrier restores the Auto Flash modeOFF Flash Override When you want the flash to fire for each shot Lights SelftimerDisplay Locked when the shutter Press the button to display Using the RC-200 RemoteTo cancel this mode, press Light near the camera A width of 6 ~ 12.5 mm 0.23 ~ 0.42 Open the buckle Insert Strap Close BuckleHandling Cautions Replacing the BatteryYear indication will start blinking Press the Mode button for two seconds or longerPress the SET button to correct the year Repeat steps 2 and 3 to set the day, hour and minutes Press the Mode button againMonth indication will start blinking Pressed againMake sure to correct the data Quartzdate models onlyDay-month-year Day-hour-minute Month-day-yearNo data Year-month-day Do not leave the camera in any Care and StorageSunlight for example, in a Car or on the beach If the camera gets wet, wipe itDo not apply excessive force to Temperatures, even within thisDo not expose the camera to When transporting the camera From a cold place to a warm Page Specifications Backlight control +1.5 EV Ft ~ infinity Exposure control ProgrammedMetering. Auto exposure Range Wide angle EV Next lower speed. For non DX-coded film and film with 800, 1600 and 3200. FilmAutomatic rewind stop ~ 12.5 ft with ISO 400 color negative film Normal temperature withDimensions 116.5 W x 62 H Day-hour-minute External indication of data Data Specifications for Date UnitFilm speed setting Automatic calendar system Up to year X 1.7 x 0.5 Specifications for RC-200CZ9504