Olympus 80S manual Selftimer, Display, Lights

Page 33

SELFTIMER

1. Press the button to

display

Fix the camera on a tripod or other support.

2.Aim at your subject, and press the shutter release button. The shutter will be released about 12 seconds after you press the button. The selftimer automatically disengages

after release.

10 sec: Selftimer indicator

lights

2 sec: Blinks

33

Image 33

Contents Accura Zoom 80S Read this manual carefully before using your cameraIndicates Never Attempt to Page Using the RC-200 remote control Viewfinder Names of PartsPage Viewfinder Display Viewfinder Display LCD PanelLCD Panel Attach the strap as shown Immediately Loading the BatteryFrom making electrical contact. To avoid this, wipe both Checking the Batteries Film Proper Shutter ReleaseLoading the Film Make sure the film is lying flat CorrectIncorrect Push the film cartridge gently toAlign the film leader with the mark , and close Back cover Open the lens barrier untilExposure counter on the LCD panel reads Taking Pictures Open the lens barrier until you feel a clickActivate. Release your finger Page How to Use the Zoom Lever Position the autofocus mark on your subject Lights. Exposure also will be Adjusted automaticallyDepress the shutter release button halfway to Autofocus accuracyAutofocus windows and flash Workingdistance0.6m2ft~ Infinity Depress the shutter release button fully to take the pictureClose-up Correction Try to keep the lens barrier closed After ShootingAfter the motor stops UnloadingthefilmRemove the film Rewinding the film before the end of the rollUsing the Flash Modes Setting the ModesYour purpose Mode p Fill-In Flash ForcedSubjects are close Auto Flash Flash fires automatically in dark placesFlash Working Range with RED EYE Reducing Flash Red-eye reduction may not be effective when the subjectFlashes Is too far from the cameraOne second Lens barrier restores the Auto Flash mode OFF Flash OverrideTwilight or night scenes When you want the flash to fire for each shot Selftimer DisplayLights Locked when the shutter Using the RC-200 Remote To cancel this mode, pressPress the button to display Light near the camera A width of 6 ~ 12.5 mm 0.23 ~ 0.42 Open the buckle Insert Strap Close BuckleHandling Cautions Replacing the BatteryPress the Mode button for two seconds or longer Press the SET button to correct the yearYear indication will start blinking Repeat steps 2 and 3 to set the day, hour and minutes Press the Mode button againMonth indication will start blinking Pressed againMake sure to correct the data Quartzdate models onlyMonth-day-year No data Year-month-dayDay-month-year Day-hour-minute Do not leave the camera in any Care and StorageSunlight for example, in a Car or on the beach If the camera gets wet, wipe itTemperatures, even within this Do not expose the camera toDo not apply excessive force to When transporting the camera From a cold place to a warm Page Specifications Ft ~ infinity Exposure control Programmed Metering. Auto exposure Range Wide angle EVBacklight control +1.5 EV Next lower speed. For non DX-coded film and film with 800, 1600 and 3200. FilmAutomatic rewind stop ~ 12.5 ft with ISO 400 color negative film Normal temperature withDimensions 116.5 W x 62 H Specifications for Date Unit Film speed setting Automatic calendar system Up to yearDay-hour-minute External indication of data Data X 1.7 x 0.5 Specifications for RC-200CZ9504