Olympus 80S Press the Mode button again, Repeat steps 2 and 3 to set the day, hour and minutes

Page 40

3.Press the MODE button again.

The month indication will start blinking.

4.Repeat steps 2 and 3 to set the day, hour and minutes.

Note: As you press the mode button, the blinking indication

changes in the order of year, month, day, hour, and minute. The data correction will be finished when the mode button is

pressed again.

40

Image 40
Contents Read this manual carefully before using your camera Accura Zoom 80SIndicates Never Attempt to Page Using the RC-200 remote control Names of Parts ViewfinderPage Viewfinder Display LCD Panel Viewfinder DisplayLCD Panel Attach the strap as shown Loading the Battery ImmediatelyFrom making electrical contact. To avoid this, wipe both Checking the Batteries Proper Shutter Release FilmLoading the Film Correct Make sure the film is lying flatIncorrect Push the film cartridge gently toOpen the lens barrier until Align the film leader with the mark , and close Back coverExposure counter on the LCD panel reads Open the lens barrier until you feel a click Taking PicturesActivate. Release your finger Page How to Use the Zoom Lever Lights. Exposure also will be Adjusted automatically Position the autofocus mark on your subjectDepress the shutter release button halfway to Autofocus accuracyDepress the shutter release button fully to take the picture Autofocus windows and flash Workingdistance0.6m2ft~ InfinityClose-up Correction After Shooting Try to keep the lens barrier closedUnloadingthefilm After the motor stopsRemove the film Rewinding the film before the end of the rollSetting the Modes Using the Flash ModesYour purpose Fill-In Flash Forced Mode pSubjects are close Flash fires automatically in dark places Auto FlashFlash Working Range with Red-eye reduction may not be effective when the subject RED EYE Reducing FlashFlashes Is too far from the cameraOne second OFF Flash Override Lens barrier restores the Auto Flash modeTwilight or night scenes When you want the flash to fire for each shot Display SelftimerLights Locked when the shutter To cancel this mode, press Using the RC-200 RemotePress the button to display Light near the camera Open the buckle Insert Strap Close Buckle A width of 6 ~ 12.5 mm 0.23 ~ 0.42Replacing the Battery Handling CautionsPress the SET button to correct the year Press the Mode button for two seconds or longerYear indication will start blinking Press the Mode button again Repeat steps 2 and 3 to set the day, hour and minutesMonth indication will start blinking Pressed againQuartzdate models only Make sure to correct the dataNo data Year-month-day Month-day-yearDay-month-year Day-hour-minute Care and Storage Do not leave the camera in anySunlight for example, in a Car or on the beach If the camera gets wet, wipe itDo not expose the camera to Temperatures, even within thisDo not apply excessive force to When transporting the camera From a cold place to a warm Page Specifications Metering. Auto exposure Range Wide angle EV Ft ~ infinity Exposure control ProgrammedBacklight control +1.5 EV 800, 1600 and 3200. Film Next lower speed. For non DX-coded film and film withAutomatic rewind stop Normal temperature with ~ 12.5 ft with ISO 400 color negative filmDimensions 116.5 W x 62 H Film speed setting Automatic calendar system Up to year Specifications for Date UnitDay-hour-minute External indication of data Data Specifications for RC-200 X 1.7 x 0.5CZ9504