Installing the Scanner
Site specifications
Place the scanner:
•in a clean area with temperature and relative humidity typical of an office environment
CAUTION: The scanner and power supply must only be used indoors in a dry location.
•on a stable, level work surface capable of supporting the following weights:
-i150 Scanner: 10.80 kg (23.75 lb.)
-i160 Scanner: 12.61 kg (27 lb.)
•within 1.52 metres (5 feet) of an electrical power outlet
NOTE: For more information about the scanner specifications, refer to Appendix A, Specifications.
System requirements
Minimum system configuration
To operate the scanner, the following minimum configuration is required.
NOTE: The actual performance of the system depends upon the scanning application, choice of scanning parameters, and the host computer configuration. If the scanner is not performing at the optimal speed, a faster computer and/or more RAM may be necessary to obtain the rated throughput.
•IBM PC (or compatible) with a Pentium III 1 GHz processor
-i160 Scanner: for scanning at 300 dpi with deskew, you will need at least a 1.8 GHz processor for
•Microsoft Windows 98SE, Windows Millennium Edition (Me), Windows 2000 Professional, or Windows XP
•100 MB of available hard disk space (200 MB is recommended)
•128 MB of RAM
•Monitor (VGA)
•Mouse
7 |