Kodak A-61514 manual Cleaning the imaging guides

Page 28

Cleaning the imaging guides

3. Wipe the upper and lower transport areas with a roller cleaning pad.

4.Dry the transport area with a dry Staticide Wipe.

5.Push against the raised edge on the left side of the rear roller cover and pull the cover up and out to remove it.

Rear drive roller cover

6.Remove any dust or debris under the rear drive roller cover.

7.Re-install the rear drive roller cover.

8.Go to the next section to clean the imaging guides.

Clean the exposed (top side) surfaces of the imaging guides. You do not need to remove the imaging guides for cleaning unless there is dust or dirt on the underside of the imaging guide. If you need to remove the imaging guides, follow the instructions for “Installing the Kodak Imaging Guide Set for i100 Series Scanners”.

1. Wipe the upper and lower imaging guides with a Staticide Wipe.

2.Dry the imaging guides with a dry Staticide Wipe.

3.Lower the scanner door and press it down firmly until it latches into place.

4.Go to the next section to clean the paper path.

A-61514 September 2004

25

Image 28
Contents User’s Guide Contents Using the Scanner TroubleshootingScanner features IntroductionPaper transport features Image quality features MaintenanceSpeed/capacity Throughput 200 dpiPreparing documents for scanning Recommended documentsSafety information User precautionsPower system Safety and regulatory agency approvalsEnvironmental information Acoustic emission United States EMC statementsJapan Installing the Scanner Site specificationsMinimum system configuration System requirementsRecommended system configuration Unpacking the scanner Registering your scannerRemoving the foam sheet Scanner components FrontRear Internal Making connections Power setup Dry locationPage Page Tray extenders and side guides Closing the input and output trays Using the Scanner Starting and stopping scanning Automatic feedingManual feeding Continuous feedingDamaged documents Maintenance Cleaning the scanner Cleaning the separator module Front roller cover Page Cleaning the imaging guides Cleaning the paper path Replacing partsCAT No September Indicator lights TroubleshootingService indicator lights Page System is not responding Color image quality Problem solving Problem Possible SolutionMaintenance section Transporting the scanner Appendix a Specifications Operating Temperature Power ConsumptionHumidity Heat LoadAppendix B Supplies and Accessories Document I M a G I N G