Using the Scanner
Starting and stopping scanning
Automatic feeding
Scanning is controlled by software developed for your application. To start and stop scanning, refer to the documentation provided with your software.
To scan a batch of documents, follow the guidelines for size, type, quantity, etc., in the Introduction section. For faster throughput, feed documents into the automatic document feeder (ADF) in landscape orientation (longer side as the leading edge).
IMPORTANT: Staples and paper clips in documents may damage the scanner. Remove all staples and paper clips before scanning.
1.Align the leading edges of the stacked documents.
2.Position the leading edge of the documents face down and centered in the ADF.
3.Adjust the document feeder guides.
4.Adjust the output tray position, if necessary.
5.Pull out the output tray extender, if necessary.
6.Start scanning.
18 |