4Using another clean section of the cloth, gently hold the cloth against the contacts for about three seconds, and then wipe in the direction shown.
5With another clean section of the cloth, repeat step 3 and step 4.
6Let the nozzles and contacts dry completely.
7Reinsert the print cartridges.
8Print the document again.
9If the print quality does not improve, clean the print nozzles. For more information, see “Cleaning the print cartridge nozzles” on page 59.
10Repeat step 9 up to two more times.
11If print quality is still not satisfactory, replace the print cartridges.
Cleaning the exterior of the printer
1Make sure that the printer is turned off and unplugged from the wall outlet.
CAUTION: To avoid the risk of electric shock, unplug the power cord from the wall outlet and disconnect all cables to the printer before proceeding.
2Remove paper from the paper support and paper exit tray.
3Dampen a clean,
Warning: Do not use household cleaners or detergents, as they may damage the finish of the printer.
4Wipe only the outside of the printer, making sure to remove any ink residue that has accumulated on the paper exit tray.
Warning: Using a damp cloth to clean the interior may cause damage to your printer.
5Make sure the paper support and paper exit tray are dry before beginning a new print job.
60
