Are you printing a large file?
The ink levels displayed in the printer software are not updated during a print job; they represent the ink level at the beginning of a print job. The ink levels may seem inconsistent in the Printing Status window when you are printing a large file.
Ink levels seem to go down too quickly
These are possible solutions. Try one or more of the following:
Are you printing photos or documents with a large number of graphics?
Because photos and graphics require more ink than text documents, ink usage increases when you print photos or graphics.
Are you printing with the Best Quality/Speed setting?
To reduce ink usage, select Photo only when you are printing on photo or heavyweight matte paper. All other paper types print best at a lower Quality/Speed setting. Use the Quick Print or Normal setting to print most text documents.
A blank or incorrect page prints
Remove the sticker and tape from the print cartridges
Lift the access cover, and remove the print cartridges from the print cartridge carrier. Make sure the sticker and tape are removed from the print nozzles located on the bottom of the cartridges.
Make sure the cartridges are properly installed
With the front of the printer facing you, check for proper print cartridge installation. If you are using a color cartridge, make sure it is properly installed in the right carrier. If you are using a black or photo cartridge, make sure it is properly installed in the left carrier.
Check the USB connection
1Check that the USB cable is connected to the computer. The USB port on the back of the computer is marked
by the 
USB symbol. Plug the long, flat end of the USB cable into this port.
2Make sure that the smaller, more square end of the USB cable is plugged into the back of the printer.
3Check that the USB cable is not damaged and that the 
light is on.
Close other open files before printing
Before sending a file to print, close all other open files in the program you are using. The printer prints a blank page when too many files are open in the same program.
Characters on printout are missing or unexpected
These are possible solutions. Try one or more of the following:
Make sure the printer is set as the default printer
For more information, see “Checking the printer status.”
Make sure the fonts are applied correctly in the program
Most programs do not print a stretched or resized font.
85
