4Select Photo Size to select from a list of defined photo sizes, or click Custom Size to enter a different photo size.
Note: If you selected Photo Size, you can click Rotate to rotate your photo 90 degrees clockwise.
5If you selected Custom Size, enter the width and height for your
Note: Maintain Aspect Ratio is selected by default. This ensures that your image will remain proportional.
Applying One-Click Auto Fixes to a photo
From the Productivity Studio Welcome Screen, click the Quick Fixes tab to access all three
1Click File Open to select the image you want to edit.
2With an image open, click
3Click Automatic Brightness to adjust only the brightness of your image.
4Click Automatic
Note: Click Undo at the top of the window if you are not satisfied with the results after applying any of the
Reducing the red-eye effect in a photo
1From the Productivity Studio Welcome Screen, click File Open to select the image you want to edit.
2With an image open, click the Quick Fixes tab.
3Click Automatic
4Click Manual Red-Eye Reduction.
5Move the cursor across the photo, and place it over an affected eye.
6Click to reduce the
Blurring/Sharpening a photo
Increasing the amount of blur will soften your image. Increasing the sharpness will make your image seem more focused.
1From the Productivity Studio Welcome Screen, click File Open to select the image you want to edit.
2With an image open, click the Enhancements tab.
3Click Blur / Sharpen.
4Use the slider to blur or sharpen the image. You can preview the changes to the image by comparing the Before and After preview panes at the top of the window.
5Click OK to accept your changes, or click Cancel to reject them.
49