3If the wireless access point (wireless router) responds, you will see several lines appear that start with “Reply from”. Turn off and restart the printer.
4If the wireless access point (wireless router) does not respond, it will take several seconds and then you will see “Request timed out.”
Try the following:
aClick:
•In Windows Vista: 
Control Panel Network and Internet Network and Sharing Center
•In Windows XP and earlier: Start Settings or Control Panel Network Connection
bSelect the appropriate connection from the ones shown.
Note: If the computer is connected to the access point (router) by an Ethernet cable, the connection may not include the word “wireless” in its name.
c
Run the wireless setup again
If your wireless settings have changed, you must run the printer wireless setup again. Some reasons your settings may have changed include your having manually changed your WEP or WPA keys, channel, or other network settings; or the wireless access point (wireless router) having been reset to factory defaults.
Notes:
•If you change network settings, change them on all the network devices before changing them for the wireless access point (wireless router).
•If you have already changed the wireless network settings on your wireless access point (wireless router), you must change the settings on all the other network devices before you can see them on the network.
1Click:
•In Windows Vista: 
.
•In Windows XP and earlier: Start.
2Click Programs or All Programs Lexmark 1500 Series.
3Click Wireless Setup.
Note: You may be prompted to connect the printer to the computer again using the installation cable as part of the setup process.
4Follow the instructions on the computer screen.
Wi-Fi indicator light is not lit
Check power
If the 
light is not on, see “Power button is not lit” on page 63.
72
