Important Information Regarding Camera Mounting
Please read the following information before mounting the camera. Consult an authorized dealer for mounting.
Caution
•Make sure you attach the safety wire when mounting the bracket and the camera on a ceiling to prevent them from falling.
English
Note
•This product should only be used with the BB- HCM527 Network Camera.
•If using an SD memory card, insert the card before installing the camera in the bracket.
•Use screws that are appropriate for the material of ceiling.
•The included screws are for use with wooden ceilings only.
•To ensure that camera images are displayed properly, do not mount the bracket on an incline.
•The camera’s MAC address and serial number are printed on the bottom of the camera and are needed in order for camera configuration and maintenance. Make a note of both of them for before mounting the camera.
•Mounting and cabling instructions described in this document follow generally accepted guidelines suitable for residential installations. In some areas, commercial and industrial installations are regulated by local or state ordinances. For such installations, contact your local building department or building inspector for more details.
•Camera images can be viewed in relatively dark areas, however, image quality decreases when viewing dark images. We recommend using supplemental lighting for best results.
•Prolonged exposure to direct sunlight or halogen light may damage the camera’s image sensor. Mount the camera appropriately.
•When mounting the camera, make sure to wrap the AC adaptor cord (if used) and other cables (external microphone or speaker cable, video cable, etc.) around the hooks as shown to ensure secure connections.
•Do not directly touch the lens cover. Clean the lens cover with a dry and soft cloth if necessary.
•There must be at least 80 mm of space above the ceiling board where this product will be installed.
•The ceiling board must be no more than 40 mm thick.
At least 80 mm
Ceiling board: Max. 40 mm
•The illustration below is an example of a completed installation, when looking at the rear of the camera.
3