RCA ProV600 manual Charge the Battery, Refresh the Battery

Page 15

First-Time Operation

	To AC Wall
	Outlet 100-	Reference Marks
	240 Volts,	Reference Marks
	240 Volts,
	50/60 Hz.	Adapter/Charger
		Adapter/Charger

Hold Battery

Flush and

Slide

REFRESH

Button

POWER

Indicator

CHARGE

Indictor

Caution: When a battery is attached to the adapter/charger, do not turn them upside down. The battery may fall off and be damaged or cause injury.

Charge the Battery

If the DC cable is attached to the DC OUT jack on the adapter/charger, remove its plug.

1.Plug adapter/charger into nearest AC outlet (100-240V, 50/60Hz). The POWER indicator lights.

2.Align reference marks on battery with marks on adapter/charger, and slide the battery in the direction of the arrow until it locks into place.

3.If the battery is properly connected, the adapter/charger’s CHARGE indicator will light.

Note: The CHARGE indicator will flash rapidly if the battery is not installed properly. Remove the battery from the adapter/charger and attach it again. If the indicator still flashes, the battery cannot be charged.

4.When the CHARGE indicator turns off, remove the charged battery by sliding it off the adapter/charger.

5.Remove the power cord from the AC outlet.

Refresh the Battery

The battery will provide increased operation time if you “refresh” it before every charging. The refresh feature “refreshes” the battery by completely discharging it. Refreshing takes approximately 4 hours.

1.Plug in the adapter/charger and attach the battery.

2.Press REFRESH. The CHARGE indicator flashes slowly while the battery discharges.

3.When discharging is completed, the CHARGE indicator stops flashing. Then the battery begins charging.

4.After the battery is charged, the CHARGE indicator turn off.

13

Image 15

Contents ProV600 Camcorder Users guideProduct Registration Important Safety InformationAssistance Table of ContentsRecording Playback Optional AccessoriesCare and Maintenance Limited WarrantyUnpack the camcorder and accessories First-Time OperationAssistance Attach the shoulder strap Attach lens cap cord and adjust handstrapAttach the adapter/charger Insert a cassette Turn on the camcorderUse the viewfinder Use the LCD MonitorClose the monitor and replace the lens cap Start and stop recordingPlay back what you have recorded Turn off the camcorderReview camcorder’s operating controls VCR Green CAM Red IndicatorVolume Using the Adapter/Charger to Power Your Camcorder Using an Optional Plug AdapterAttach Adapter/Charger Battery Safety Precau- tions Using the Battery to Power Your CamcorderAttach the Charged Battery Remove the BatteryRefresh the Battery Charge the BatteryBattery Care and Storage Battery Level IndicatorInstall Remote’s Lithium Cell Remote ControlButtons Remote Control ButtonsCamcorder in the CAM Camera Mode Camcorder in the VCR ModeRemote Control Sensor Recording Times Erase Protection Safety TabVideo Cassettes Cassette Recording TimeCassette Care and Storage Insert or Remove a CassetteMaking a Recording RecordingZoom in and out Attach a power supplyInsert a tape Start and stop recordingEyepiece Focus Control Using the ViewfinderUsing the LCD Monitor Date and Time, or Beep on IndicatorLCD Monitor and Viewfinder Displays Date Display Auto DATE, DateTape-Remaining Display Focus Indicators FocuslockZoom Indicator Status DisplaysQuick Review Feature Camera Edit FeatureFlying Erase Head AE Automatic Exposure Shutter Speed Control Beep FeatureMicrophone Automatic White Balance and IrisBlank Search Tape-Remaining Display Zooming Using the Zoom LeverFocusing Using Focus LockConditions Requiring Focus Lock Install the Clock Lithium Cell Date/Time Display Clock Lithium CellRemove the Cell Time and Date Display Date/Time Display Setting the Time and DateSet the Time and Date Correct the Time and DateSelect the Date or Time and Date to Record To Record the Date or Date and Time on Your TapeTime Counter To Use the Memory-Stop FeatureTraveling Tips Recording TipsUse LCD monitor Playback Using the LCD Monitor or ViewfinderPlayback To Play Back a TapeStop-Action Pause Playback FeaturesVisual Searching Tape PositioningPlayback on TV or VCR with AUDIO/VIDEO in Jacks InstallationViewing What the Camcorder is Seeing or Recording Playback Operation and How to Copy Tapes on the VCRBack of TV VHF Antenna Playback on a TV without Audio/Video InputsPlayback Operation Viewing What the Camcorder Is RecordingNormal TV Viewing Optional Accessories To order accessories, contact your local DealerAC201A Soft Carrying Case Coaxial RF Cables VH54 Cable TransformerVH82 6-ft VH90 12-ft Using the Optional AC088 Tripod Accessory Order Form USE Your Credit Card United States and Canada Orders To order accessories, contact your local DealerCleaning the Camcorder’s LCD Monitor Care and MaintenanceCleaning the Camcorder Cleaning the Camcorder’s LensCustomer Assistance and Service Proper Care and StorageThings to Avoid Trouble Checks Trouble Checks and AdjustmentsTrouble Checks See Returning equipment to Thomson for repair or exchange For how long after your purchase Limited WarrantyIf you purchased your camcorder outside the United States Information to User SpecificationsIndex Tape Index Index Tocom Meridian Street Indianapolis,