RCA ProV600 manual Playback on a TV without Audio/Video Inputs, Back of TV VHF Antenna

Page 42

Playback

Playback on a TV without Audio/Video Inputs

To connect your camcorder to a TV without audio/video inputs, you will need an optional CRF800 output adapter and an optional coaxial RF cable, such as VH82 or VH90 shown on page 43. If your TV has AUDIO and VIDEO IN jacks (or is connected to a VCR), refer to pages 38-39.

	Optional	OR
	Optional
	RF Coaxial
	Cable
	(such as VH82	Optional
	or VH90)	Optional
	or VH90)	Transformer
		Transformer
		(Such as VH54)
	CHANNEL
	4CH/3CH
	Switch

VHF

IN

FROM

ANT

VHF

Back of TV

Back of TV

			VHF Antenna
			OR
	Optional
	CRF800 RF	Optional 300-75 Ohm	VHF Antenna
	Output Adapter	Optional 300-75 Ohm
	Output Adapter	Transformer
		Transformer

Installation

1.Disconnect the VHF antenna from your TV. Connect the antenna to the connector on the RF output adapter as shown above if you are going to leave the adapter connected to the TV.

Note: If your VHF antenna is the flat twin-lead type attached by two screws, you will also need an optional 300/75 ohm transformer.

2.Attach one end of the optional coaxial RF cable to the other connector on

the adapter, and attach the other end to the VHF input on your TV as shown.

Note: If your TV has 300 ohm screw terminals, you will need a 75/300 ohm transformer, such as VH54, shown on page 43.

3.Attach the RF output adapter’s plug to the A, RF OUT, and V jacks located under the small cover on the side of the camcorder.

40

Image 42

Contents Camcorder Users guide ProV600Important Safety Information Product RegistrationTable of Contents AssistanceLimited Warranty Optional AccessoriesCare and Maintenance Recording PlaybackUnpack the camcorder and accessories First-Time OperationAssistance Attach lens cap cord and adjust handstrap Attach the shoulder strapAttach the adapter/charger Turn on the camcorder Insert a cassetteUse the LCD Monitor Use the viewfinderTurn off the camcorder Start and stop recordingPlay back what you have recorded Close the monitor and replace the lens capVCR Green CAM Red Indicator Review camcorder’s operating controlsVolume Using the Adapter/Charger to Power Your Camcorder Using an Optional Plug AdapterAttach Adapter/Charger Remove the Battery Using the Battery to Power Your CamcorderAttach the Charged Battery Battery Safety Precau- tionsCharge the Battery Refresh the BatteryBattery Level Indicator Battery Care and StorageRemote Control Install Remote’s Lithium CellCamcorder in the VCR Mode Remote Control ButtonsCamcorder in the CAM Camera Mode ButtonsRemote Control Sensor Cassette Recording Time Erase Protection Safety TabVideo Cassettes Recording TimesInsert or Remove a Cassette Cassette Care and StorageRecording Making a RecordingStart and stop recording Attach a power supplyInsert a tape Zoom in and outUsing the Viewfinder Eyepiece Focus ControlUsing the LCD Monitor Date Display Auto DATE, Date Beep on IndicatorLCD Monitor and Viewfinder Displays Date and Time, orStatus Displays Focus Indicators FocuslockZoom Indicator Tape-Remaining DisplayQuick Review Feature Camera Edit FeatureFlying Erase Head Automatic White Balance and Iris Beep FeatureMicrophone AE Automatic Exposure Shutter Speed ControlBlank Search Tape-Remaining Display Using the Zoom Lever ZoomingFocusing Using Focus LockConditions Requiring Focus Lock Install the Clock Lithium Cell Date/Time Display Clock Lithium CellRemove the Cell Correct the Time and Date Date/Time Display Setting the Time and DateSet the Time and Date Time and Date DisplayTo Record the Date or Date and Time on Your Tape Select the Date or Time and Date to RecordTo Use the Memory-Stop Feature Time CounterRecording Tips Traveling TipsTo Play Back a Tape Playback Using the LCD Monitor or ViewfinderPlayback Use LCD monitorTape Positioning Playback FeaturesVisual Searching Stop-Action PauseInstallation Playback on TV or VCR with AUDIO/VIDEO in JacksPlayback Operation and How to Copy Tapes on the VCR Viewing What the Camcorder is Seeing or RecordingPlayback on a TV without Audio/Video Inputs Back of TV VHF AntennaPlayback Operation Viewing What the Camcorder Is RecordingNormal TV Viewing Optional Accessories To order accessories, contact your local DealerAC201A Soft Carrying Case Coaxial RF Cables VH54 Cable TransformerVH82 6-ft VH90 12-ft Using the Optional AC088 Tripod Accessory Order Form USE Your Credit Card To order accessories, contact your local Dealer United States and Canada OrdersCleaning the Camcorder’s Lens Care and MaintenanceCleaning the Camcorder Cleaning the Camcorder’s LCD MonitorCustomer Assistance and Service Proper Care and StorageThings to Avoid Trouble Checks and Adjustments Trouble ChecksTrouble Checks See Returning equipment to Thomson for repair or exchange Limited Warranty For how long after your purchaseIf you purchased your camcorder outside the United States Specifications Information to UserIndex Tape Index Index Meridian Street Indianapolis, Tocom