RCA ProV600 manual Trouble Checks

Page 53

Trouble Checks

Trouble

Checks and Adjustments

 

 

 

Tape stops during

Time-counter memory may be on. Whenever an “M

rewind or fast

 

appears with the time-counter display, the camcorder will

forward

 

stop rewinding (or fast forwarding) when counter reads

 

 

M 0:00:00. Press REW or F.FWD again to continue

 

 

rewinding or fast-forwarding, or press COUNTER

 

 

MEMORY on the remote to turn off the memory-

 

 

stop feature.

 

 

Camcorder remains in

• Press PLAY or PAUSE to return to normal playback.

pause mode

 

 

 

 

Recorded sound is

• Subject was too far from camcorder.

too low or distorted

 

 

 

 

 

Dew indicator

If the dew indicator ( ) flashes in the viewfinder, there

flashing in viewfinder

 

is moisture in the camcorder. Wait until this indicator no

 

 

longer appears before operating the camcorder.

 

 

Poor auto-focus

Subject is not in center of viewfinder or two subjects are

operation

 

at different distances. Use the focus lock feature. See

 

 

page 30.

 

 

Viewfinder displays

• Lens is smudged and image appears unfocused.

are out of focus

• Eyepiece focus control is misadjusted.

 

• The small controls on the bottom of the viewfinder control

 

 

the brightness and focus of the viewfinder. These controls

 

 

are set at the factory and should require no adjustment. If

 

 

the brightness or focus of the viewfinder ever does require

 

 

adjustment, carefully use a plastic screwdriver. Make the

 

 

adjustments with caution to prevent damaging the

 

 

miniature controls.

 

 

Image in LCD

• Adjust brightness of LCD monitor with BRIGHT control

monitor is not bright

 

on top of the monitor.

enough.

 

 

 

 

Sound too low when

• Adjust volume of built-in speaker using the VOLUME

playing back tape

 

control on top of the monitor.

using LCD monitor

 

 

 

 

 

51

Image 53
Contents ProV600 Camcorder Users guideProduct Registration Important Safety InformationAssistance Table of ContentsCare and Maintenance Optional AccessoriesLimited Warranty Recording PlaybackAssistance Unpack the camcorder and accessoriesFirst-Time Operation Attach the shoulder strap Attach lens cap cord and adjust handstrapAttach the adapter/charger Insert a cassette Turn on the camcorderUse the viewfinder Use the LCD MonitorPlay back what you have recorded Start and stop recordingTurn off the camcorder Close the monitor and replace the lens capReview camcorder’s operating controls VCR Green CAM Red IndicatorVolume Attach Adapter/Charger Using the Adapter/Charger to Power Your CamcorderUsing an Optional Plug Adapter Attach the Charged Battery Using the Battery to Power Your CamcorderRemove the Battery Battery Safety Precau- tionsRefresh the Battery Charge the BatteryBattery Care and Storage Battery Level IndicatorInstall Remote’s Lithium Cell Remote ControlCamcorder in the CAM Camera Mode Remote Control ButtonsCamcorder in the VCR Mode ButtonsRemote Control Sensor Video Cassettes Erase Protection Safety TabCassette Recording Time Recording TimesCassette Care and Storage Insert or Remove a CassetteMaking a Recording RecordingInsert a tape Attach a power supplyStart and stop recording Zoom in and outEyepiece Focus Control Using the ViewfinderUsing the LCD Monitor LCD Monitor and Viewfinder Displays Beep on IndicatorDate Display Auto DATE, Date Date and Time, orZoom Indicator Focus Indicators FocuslockStatus Displays Tape-Remaining DisplayFlying Erase Head Quick Review FeatureCamera Edit Feature Microphone Beep FeatureAutomatic White Balance and Iris AE Automatic Exposure Shutter Speed ControlBlank Search Tape-Remaining Display Zooming Using the Zoom LeverConditions Requiring Focus Lock FocusingUsing Focus Lock Remove the Cell Install the Clock Lithium CellDate/Time Display Clock Lithium Cell Set the Time and Date Date/Time Display Setting the Time and DateCorrect the Time and Date Time and Date DisplaySelect the Date or Time and Date to Record To Record the Date or Date and Time on Your TapeTime Counter To Use the Memory-Stop FeatureTraveling Tips Recording TipsPlayback Playback Using the LCD Monitor or ViewfinderTo Play Back a Tape Use LCD monitorVisual Searching Playback FeaturesTape Positioning Stop-Action PausePlayback on TV or VCR with AUDIO/VIDEO in Jacks InstallationViewing What the Camcorder is Seeing or Recording Playback Operation and How to Copy Tapes on the VCRBack of TV VHF Antenna Playback on a TV without Audio/Video InputsNormal TV Viewing Playback OperationViewing What the Camcorder Is Recording AC201A Soft Carrying Case Optional AccessoriesTo order accessories, contact your local Dealer VH82 6-ft VH90 12-ft Coaxial RF CablesVH54 Cable Transformer Using the Optional AC088 Tripod Accessory Order Form USE Your Credit Card United States and Canada Orders To order accessories, contact your local DealerCleaning the Camcorder Care and MaintenanceCleaning the Camcorder’s Lens Cleaning the Camcorder’s LCD MonitorThings to Avoid Customer Assistance and ServiceProper Care and Storage Trouble Checks Trouble Checks and AdjustmentsTrouble Checks See Returning equipment to Thomson for repair or exchange For how long after your purchase Limited WarrantyIf you purchased your camcorder outside the United States Information to User SpecificationsIndex Tape Index Index Tocom Meridian Street Indianapolis,