Note: The Hollywood DV-Bridge utilizes DV drivers that are built into your operating sys- tem. Once the unit is connected to your computer and powered on, the PC should rec- ognize it and load the appropriate drivers automatically. You can verify whether the Hollywood DV-Bridge is installed properly by checking the Windows Device Manager. The unit should appear under the “Imaging Device” category as a “Microsoft DV Cam- era and VCR,” “Generic DV Camera and VCR” or similarly-named device. Windows may also add additional entries to the Device Manager when the Hollywood DV-Bridge is connected. This is normal. If the Hollywood DV-Bridge does not appear in the “Imaging Device” category, double-check the 1394 connection, disconnect power and reconnect power. If this does not work, check your hardware’s documentation to see if a third- party DV camcorder driver is installed, and whether instructions are provided on how to remove the driver.
For detailed information on the Device Manager, please refer to your Windows Help documentation.
For up-to-date driver troubleshooting information, go to the Interactive Knowledge area of Dazzle’s website, as described on page 63, later in this guide.
Hollywood DV-Bridge User’s Guide • Using Hollywood DV-Bridge With a PC • Page 17