RCA Hollywood DV-Bridge manual Installation

Additional Requirements

To fine-tune your system for DV editing, follow these steps:

1.Make sure all your hard disk drives are defragmented.

2.If possible, use a separate drive for storing video material.

3.Disable system extensions that are not required for editing.

Installation

No software is included with the Hollywood DV-Bridge for the Macintosh. No device drivers are necessary, since the unit utilizes drivers that are part of the Mac OS.

Although no Mac video editing software is included, the Hollywood DV-Bridge is compati- ble with a wide variety of popular Mac editing programs.

Installing the Hollywood DV-Bridge is an easy, two step process, as described below.

1.Connect the 1394/FireWire/i.LINK cable from the back of the Hollywood DV-Bridge to an available 1394 port on your Mac.

Hollywood DV-Bridge

Back

1394/FireWire/i.LINK Cable

Hollywood DV-Bridge User’s Guide • Using Hollywood DV-Bridge With a Macintosh • Page 31