RCA Hollywood DV-Bridge manual Analog Device Input

3.Connect an RCA audio cable (red and white) from the Audio Out connector(s) on the analog device (camcorder, VCR, or TV) to the Audio In connectors on the front of the Hollywood DV-Bridge.

Note: Your audio cable may have separate connectors for left and right, or the connec- tors might be joined as shown in the illustration below. Remember that you need to use a Y-adapter if the analog camcorder or VCR only supports mono output.

Analog VCR, Camcorder, or TV	Hollywood DV-Bridge
VHS

TV

RCA Video Out	RCA Video In
Or
S-Video Out	S-Video In
Audio Out	Audio In

Front

Connecting DV Output

Connect a 1394/FireWire/i.LINK cable from the 1394 connector on the front of the Holly- wood DV-Bridge to the DV connector on the DV camcorder or VCR.

Hollywood DV-Bridge

Analog Device (Input)

VHS

Or

TV

DV Out DV In

DV VCR or DV Camcorder

VHS

Front

Hollywood DV-Bridge User’s Guide • Using Hollywood DV-Bridge Without a Computer • Page 44