RCA Hollywood DV-Bridge manual Converting DV to Analog Video, Connecting DV Input

Converting DV to Analog Video

If you have a DV camcorder or VCR, you can use the Hollywood DV-Bridge to convert DV to analog video without using a computer. To begin converting, make sure that the Hollywood DV-Bridge is powered up. Then follow the procedures below.

Connecting DV Input

Connect a 1394/FireWire/i.LINK cable from the 1394 connector on the front of the Holly- wood DV-Bridge to the DV connector on the DV camcorder or VCR.

Note: This is the same setup used to connect a DV device for output as described in the previous section, “Converting Analog Video to DV.” If you have already made the connec- tion for that purpose, it is not necessary to change it. In this case, the 1394 cable handles input and output.

Hollywood DV-Bridge

DV VCR or DV Camcorder

VHS

DV Out DV In

Front

Hollywood DV-Bridge User’s Guide • Using Hollywood DV-Bridge Without a Computer • Page 48