RCA Hollywood DV-Bridge manual Connecting DV Input

Analog VCR, Camcorder, or TV	Hollywood DV-Bridge
VHS

TV

RCA Video Out	RCA Video In
Or
S-Video Out	S-Video In
Audio Out	Audio In

Front

Connecting DV Input

If you have a DV camcorder or VCR, there may be times when you want to capture the DV material directly into your computer, then edit in DV format and output the edited video back to your DV device. Since no conversion is performed, it is not necessary to use the Hollywood DV-Bridge for this process. You can accomplish this mode by simply connecting your DV device directly to your PC. However, it might be more convenient to capture and output through the Hollywood DV-Bridge. If your computer is not in a convenient location, it may be easier to simply connect the DV device to the Hollywood DV-Bridge as follows:

1.Connect one end of a 1394/FireWire/i.LINK cable to the 1394 connector on the front of the Hollywood DV-Bridge.

2.Connect the other end of the cable to the DV connector on the DV camcorder or VCR.

Hollywood DV-Bridge

DV VCR or DV Camcorder

VHS

DV Out DV In

Front

Hollywood DV-Bridge User’s Guide • Using Hollywood DV-Bridge With a PC • Page 19