RCA CC643 manual Time-Remaining Display, Set the Tape Length

Time-Remaining Display

The approximate time remaining on the tape in the camcorder for the tape speed

you have selected is automatically displayed in the viewfinder. Use the

T20o30o40 button to set the correct tape length before the camcorder can

correctly calculate time remaining.

),

,i

T20,30,40	SP-SLP
Button
	Button
			,'o,
	30MIN	I
		30MIN	T30
	29MIN	SP	:_'
	I
	3MIN		;it, _
	1	TAPE	END
	2MIN
	(Flashing)
	l
	3NIN
	(Flashing)
	,L
	OMIN
	(Flashing)		_._

Set the Tape Length

1. Use the SP-SLPswitch to select the

tape speed. SP or SLP appears in the viewfinder.

2.Use the T°20°30.40 button to select the length of tape you are using.

•Select T20 if you are using a tape with 20 minutes or less recording time.

•Select T30 if you are using a tape with 30 minutes recording time.

•Select T40 if you are using a tape with 40 minutes recording time.

The time-remaining indicator will start

flashing when the remaining tape time reaches two minutes.

TAPE END appears when the tape reaches its end during recording or a cassette is loaded whose tape is already at its end.

;7

• ..

??

,52