Attaching the Shoulder Strap
The camcorder's shoulder strap is designed to let you carry the camcorder from your shoulder and - when you are ready to shoot - bring the camcorder to shooting
position in one quick movement.
To Attach the Shoulder Strap
1.If the strap keeper is over a double section of the strap, slide the strap keeper off the end of the strap. Replace the keeper
on the strap between the buckle
and the end of theKeeper strap as shown.
,Loop the end of the strap over the top of the shoulder strap attachment ring.
Buckle Keeper
Attachment
Rings
. Thread the end of the strap back through the keeper and buckle making sure it is threaded under the outer
strap. Make sure the strap is not twisted.
4.Attach the other end of the strap to the
other shoulder strap attachment ring.
5.Adjust the shoulder strap to the desired length.
6.Slide both keepers up snugly against
the shoulder strap attachment rings to prevent the strap from slipping.
Cautions: When carrying the
camcorder:with the _shoulder strap, you
may find it convenient to rotate the viewfinder down and slide it to the
front. This helps prevent poss}ble damage to the viewf'mder from bumping against your body as you move.
Make sure the shoulder strap is firmly attached before using it to carry the camcorder.
55