4. Manual Eye-Cell Pre-Flash Setup
A. Press Cell button approx. 4 seconds until display shows “c.X”.
(“X” is the number of settable
B. With
C. The display switches back to normal mode after approx. 4 seconds if no button is pressed. The settings are automatically stored.
D. Cell LED flashes in fast intervals if the
> Recall The
If you want to recall and control the actual
5. Setup Pre-Flash Timeframe (only for advanced users)
Change manufacturer settings only in case of problems with the
!of your camera
>Setting:
•Press Cell button for more than 6 seconds until display shows “t.X” (“X” is the value from 1 to 8)
•Use the Cell button to toggle between “t.X” and “b.X” settings.
•Use the
•The display switches back to normal mode after approx. 4 seconds if no button is pressed. The settings are automatically stored.
•Standard settings are:
Pre-Flash Timeframe Setting “t.X
t. is the time window of all released anti
Set the value t. between 1 and 8 to ensure that all
Value t | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
|
|
|
|
|
|
|
|
|
Time /seconds | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
Chose values between 0 and 7.
Value b | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
|
|
|
|
|
|
|
|
|
Time: m/seconds | 0 | 2 | 4 | 6 | 8 | 10 | 12 | 14 |
11