Elinchrom BX 250RI, BX 500RI Frequency Channel, EL-Skyport Sync Speed & Standard Mode

Page 19

English

Fig. 2

Frequency

 

channel selector

 

MODE switch

 

 

 

GROUP switch

Frequency Channel

RX feature button

Power decrease

RX feature button Power increase or modelling lamp toggle

Flash Test / Flash Mode / Configuration button

Flexible swivel Antenna 360 ̊

Status LED

Note:

Transmitter and the corresponding Transceiver RX, the Universal Receiver or the EL units with integrated EL-Skyport Receiver must have the same frequency channel settings!

Frequency

 

Slide Button configuration

 

Frequency

Channel

 

 

 

 

 

/ Mhz

1

 

2

 

3

1 (default)

Off

 

Off

 

Off

2456

2

On

 

Off

 

Off

2458

 

 

 

 

 

 

 

3

Off

 

On

 

Off

2460

4

On

 

On

 

Off

2462

5

Off

 

Off

 

On

2469

 

 

 

 

 

 

 

6

On

 

Off

 

On

2471

7

Off

 

On

 

On

2473

8

On

 

On

 

On

2475

EL-Skyport Sync Speed & Standard Mode

The SPEED function is available for Ranger Quadra AS, BXRi 250 / 500 und D-Lite it and all other units, when used with the EL-Skyport Universal Speed.

Select “Speed” sync mode

Synchronises SLR cameras up to 1/250 s, or compact digital cameras up to 1/2850 s

-Select “Group” or “All” mode.

-Press test push button for minimum 5 seconds until the STATUS LED flashes two times.

-Release test push button.

-Now the EL-Skyport Transmitter Speed works in “SPEED” mode (r.2 mode).

Select “Standard” triggering mode

Synchronises SLR cameras up to 1/200 s, or compact digital cameras up to 1/1600 s

-Select “Group” or “All” mode.

-Press test push button for minimum 5 seconds until the STATUS LED flashes one time.

-Release test push button.

-Now the EL-Skyport Transmitter Speed works in “STANDARD” mode.

EL-Skyport Module Configuration:

Only possible with EL-Skyport PC / MAC software v 3.0 and higher. - Power-Save Timer, individual programmable or disabled.

- Trigger delay is programmable from 250 ms up to 15 s.

- Download the FREE EL-Skyport Software from www.elinchrom.com

18

Image 19
Contents Page English Table of contentsEnglish CE Statements for EL-Skyport Declaration of conformityDisposal and recycling CE markingTransport Safety NotePower cable Flash tubes and modelling lampsIncluded basic features Mains fuse Switch and fuse Mains supplyBefore you start Operating instructionsControl panel Overview of controls Modelling lamp modes Programmable features ResetHow to „Reset the BX-Ri Setup Visual-Flash-Control VFC modeEye-Cell advanced photocell sensor Digital multi-displaySychronisation socket Open flash «test»Intelligent Photocell-Sensor Eye-CELL SetupUsing the Standard Photocell Mode Automatic Eye-Cell Pre-Flash Setup c.0Setup Pre-Flash Timeframe only for advanced users Manual Eye-Cell Pre-Flash SetupPre-Flash Timeframe Setting t.X Charge Ready Beep Features Power Steps Per Push EL- Skyport Transceiver For Wireless Triggering SetupGroup Settings Frequency Channel SettingsError Management Flashtube replacementEnglishBX 500Ri Contents Operating Instructions FeaturesBattery Installation Hot-Shoe Connector with Screw-LockFrequency Channel EL-Skyport Sync Speed & Standard ModeIntegrated Hot-Shoe Sync 2.5 mm Socket EL-Skyport Transmitter Speed RX FeaturesEL-Skyport Modules TroubleshootingFCC Compliance and Advisory Statement CE StatementsDisposal and recycling