2.1.1.3Upgrade Firmware
Enter the correct User and Password to upgrade system Firmware and Web UI. Please upgrade system firmware first and then upgrade Web UI or it may damage the camera.（Figure 2.4).
Figure 2.4
Please download the firmware package for the correct type of your camera before you upgrade. Follow the upgrade document carefully to upgrade. Please see readme file first before you upgrade.
CAUTION: You should not upgrade the firmware unnecessarily. It is possible to damage the camera if a mistake is made during the upgrade. If your camera works well with the current firmware, we recommend that you don’t upgrade it.
NOTE: When doing an upgrade, remember you must keep the power on, and it’s best to use wired mode, connected via the network cable.
2.1.1.4Refresh Camera List
Refresh camera list manually.
2.1.1.5Flush Arp Buffer
When cable network and wireless network of the device are fixed IP address, you may encounter a problem where you can search the camera IP but can’t open the camera web page. In this case use Flush Arp Buffer.
2.1.1.6About IP Camera Tool
Check the IP Camera Tool Version and IP Camera ActiveX Control Version here.
2.2Camera Login
You can access the camera through IP Camera Tool or IE, Firefox, Safari, Google Chrome or other standard browser directly.
1.Double click the IP address of the IP Camera listed (Figure 1.9). The default browser you use will run automatically and go to the camera login interface. (Figure 2.6).
12