X10 Wireless Technology XX34A user manual

Page 15

Note: If there is still no live video after you run ActiveX, and a red cross shows in the center of the screen, or even just a black screen, please try to enable the ActiveX options of IE security settings. Please do the following steps:

1.Close the firewall of your computer.

2.Change the ActiveX settings, “IE” browser > “Tool” > “Internet Options” > “Security”> “Custom Level” > “ActiveX control and Plug-ins”, all the ActiveX options set to be “Enable”:

Especially:

Enable: Download unsigned ActiveX controls

Enable: Initialize and script ActiveX controls not marked as safe

Enable: Run ActiveX controls and plug-ins

Figure 3.1

You can also click “Startmenu->“Internet Explorer”, and choose “Internet attributes”, or via “Control Panel->“Internet Explorer”, to access Security settings.

If you allowed the ActiveX to run, but still cannot see live video, only a Red Cross in the center of the

video, and the device status light changed to yellow color not green, please change to another port number. Don’t use port 80, use another port such as 128, 1008 etc.

15

Image 15
Contents Indoor Wireless/Wired IP Network Camera Model XX34A Contents Packing List FeaturesInfrared LED 10 LEDs Wireless Antenna WI-FI AntennaProduct Views Front ViewBottom View Rear PanelPC System Requirements Hardware InstallationSoftware Installation System configuration requirementsActiveX Double click Appinstall.exe-Next-Install-Finish Page IP Camera Tool Six OptionsRefresh Camera List, Flush Arp Buffer, About IP Camera Tool 1 .1 Basic Properties Network ConfigurationPage Flush Arp Buffer Camera LoginUpgrade Firmware Refresh Camera ListDefault user name is admin, no password leave blank For IE Browser Choose ActiveX Mode For IE Browser, and signPage For Safari, Firefox, Google Browser ActiveX Mode For IE Browser For Mobile PhoneFor Visitor Channels Settings Status of ChannelsRate and Resolution OSD SettingsTOP Menu For Operator Audio Video SettingsPan/Tilt Control Mode, Bright, Contrast SettingsPreset Settings For AdministratorSet Multi-Device in LAN Multi-Device SettingsPage Set Multi-Device for WAN Page Upgrade Device Firmware Reboot Device Network SettingsBasic Network Settings Restore Factory SettingsPage Wireless LAN Settings Page Adsl Settings UPnP SettingsClick UPnP Settings to choose Using UPnP to Map Port Ddns Service Settings To change the camera’s port Third Party DdnsChoose Forwarding, select Virtual Servers Set Port Forwarding in the routerChoose Advanced, select Virtual Servers Choose Firewall, select Virtual ServersStep LoginSystemDevice Info System SettingsAlias Settings Date &Time SettingsDevice Info Users Settings Backup & Restore Indicator SettingsClick System-Device Info to check the MSN status Mail Service Settings Other SettingsPage FTP Service Settings Motion Detect Armed Alarm Service SettingsMotion Detect Sensitivity Alarm Input Armed / IO Linkage on Alarm Upload Image on Alarm Send e-mail on AlarmIO Pins for IO Alarm Linkage Pins 1 Output 2 Output 3 Alarm input 4 Input GNDSound on Alarm Record on AlarmREC Automatically and Save to PC Path Settings Server Push Mode For Safari, FireFox, Google Browser Sign in mobile phone Frequently Asked Questions UPnP always fails Can’t find multi-device settings and record iconCamera cannot connect wirelessly Only see black screen or unusual code when remotely loggedDefault network Parameters Default ParametersThere’s no picture Problems with ActiveX Controller Problems with network bandwidthSpecifications FCC Caution X10 Wireless Technology, Inc. Limited One Year Warranty