X10 Wireless Technology XX34A Basic Network Settings, Restore Factory Settings, Reboot Device

3.1.4Restore Factory Settings

Click Restore Factory Settings, will pop-up a prompt, select OK, all the parameter will be returned to factory settings, and the device will reboot.

Figure 5.5

3.1.5Reboot Device

Click Reboot the device, will pop-up a prompt, select OK, then the device will reboot

Figure 5.6

3.2Network Settings

Click Network, will pop-up the prompt as below:

3.3Basic Network Settings

Here you can set the camera’s IP address; i.e., set the static IP address of the camera manually. You can also do the same settings from IP Camera Tool. (Figure 2.3).

29