X10 Wireless Technology XX34A user manual Default user name is admin, no password leave blank

Page 13

2.To access the camera by IE Browser directly, just type the camera’s IP address, for example, if the camera’s IP address is 192.168.1.123:

Figure 2.5

Figure 2.6

The default user name is admin, no password (leave blank).

Input the correct user name and password, the Sign In interface will pop-up.

There are three models to login (figure 2.7).

Figure 2.7

(1)Active Mode (For IE Browser): available in IE 6.0 or above.

(2)“Server Push Mode”: available in Firefox, Safari, and Google Chrome browser.

(3)“Sign in mobile phone”: available in Mobile phone.

13

Image 13
Contents Indoor Wireless/Wired IP Network Camera Model XX34A Contents Packing List FeaturesProduct Views Wireless Antenna WI-FI AntennaFront View Infrared LED 10 LEDsBottom View Rear PanelSoftware Installation Hardware InstallationSystem configuration requirements PC System RequirementsActiveX Double click Appinstall.exe-Next-Install-Finish Page Six Options IP Camera ToolRefresh Camera List, Flush Arp Buffer, About IP Camera Tool 1 .1 Basic Properties Network ConfigurationPage Upgrade Firmware Camera LoginRefresh Camera List Flush Arp BufferDefault user name is admin, no password leave blank For IE Browser Choose ActiveX Mode For IE Browser, and signPage For Safari, Firefox, Google Browser For Mobile Phone ActiveX Mode For IE BrowserFor Visitor Channels Settings Status of ChannelsRate and Resolution OSD SettingsTOP Menu For Operator Audio Video SettingsPan/Tilt Control Mode, Bright, Contrast SettingsPreset Settings For AdministratorSet Multi-Device in LAN Multi-Device SettingsPage Set Multi-Device for WAN Page Upgrade Device Firmware Basic Network Settings Network SettingsRestore Factory Settings Reboot DevicePage Wireless LAN Settings Page UPnP Settings Adsl SettingsClick UPnP Settings to choose Using UPnP to Map Port Ddns Service Settings To change the camera’s port Third Party DdnsChoose Forwarding, select Virtual Servers Set Port Forwarding in the routerChoose Advanced, select Virtual Servers Choose Firewall, select Virtual ServersStep LoginSystemDevice Info System SettingsDate &Time Settings Alias SettingsDevice Info Users Settings Backup & Restore Indicator SettingsClick System-Device Info to check the MSN status Mail Service Settings Other SettingsPage FTP Service Settings Motion Detect Armed Alarm Service SettingsMotion Detect Sensitivity Alarm Input Armed / IO Linkage on Alarm IO Pins for IO Alarm Linkage Send e-mail on AlarmPins 1 Output 2 Output 3 Alarm input 4 Input GND Upload Image on AlarmRecord on Alarm Sound on AlarmREC Automatically and Save to PC Path Settings Server Push Mode For Safari, FireFox, Google Browser Sign in mobile phone Frequently Asked Questions Camera cannot connect wirelessly Can’t find multi-device settings and record iconOnly see black screen or unusual code when remotely logged UPnP always failsThere’s no picture Problems with ActiveX Controller Default ParametersProblems with network bandwidth Default network ParametersSpecifications FCC Caution X10 Wireless Technology, Inc. Limited One Year Warranty