X10 Wireless Technology XX34A user manual Settings Status of Channels

Page 18

Figure 3.5

Channels:

The IE software supports 9 channels. Click to get different windows.

Click this one to view the main channel of the camera you login to.

Click this one to view 4 Channels of cameras that are connected, from CH1 to CH4. Click this one to view 9 Channels of cameras that are connected, from CH1 to CH9.

NOTE: If you want to view 4/9 channels, you should set the Multi-Device first (See 3.1 Multi-Device

Settings).

Status of Channels:

There are 9 icons at the bottom of the UI which show the status of each channel of the camera. Grey color, means there is no device connected to the main device for this channel.

Green color, means the device is connected for this channel, and it works well.

Red color, means the device for this channel is recording.

Yellow color, means this channel is set in multi-device already, but it fails to connect to the main device.

18

Image 18

Contents Indoor Wireless/Wired IP Network Camera Model XX34A Contents Features Packing ListFront View Wireless Antenna WI-FI AntennaProduct Views Infrared LED 10 LEDsRear Panel Bottom ViewSystem configuration requirements Hardware InstallationSoftware Installation PC System RequirementsActiveX Double click Appinstall.exe-Next-Install-Finish Page IP Camera Tool Six OptionsRefresh Camera List, Flush Arp Buffer, About IP Camera Tool Network Configuration 1 .1 Basic PropertiesPage Refresh Camera List Camera LoginUpgrade Firmware Flush Arp BufferDefault user name is admin, no password leave blank Choose ActiveX Mode For IE Browser, and sign For IE BrowserPage For Safari, Firefox, Google Browser ActiveX Mode For IE Browser For Mobile PhoneFor Visitor Settings Status of Channels ChannelsOSD Settings Rate and ResolutionTOP Menu Audio Video Settings For OperatorMode, Bright, Contrast Settings Pan/Tilt ControlFor Administrator Preset SettingsMulti-Device Settings Set Multi-Device in LANPage Set Multi-Device for WAN Page Upgrade Device Firmware Restore Factory Settings Network SettingsBasic Network Settings Reboot DevicePage Wireless LAN Settings Page Adsl Settings UPnP SettingsClick UPnP Settings to choose Using UPnP to Map Port Ddns Service Settings Third Party Ddns To change the camera’s portSet Port Forwarding in the router Choose Forwarding, select Virtual ServersChoose Firewall, select Virtual Servers Choose Advanced, select Virtual ServersSystem Settings Step LoginSystemDevice InfoAlias Settings Date &Time SettingsDevice Info Users Settings Indicator Settings Backup & RestoreClick System-Device Info to check the MSN status Other Settings Mail Service SettingsPage FTP Service Settings Alarm Service Settings Motion Detect ArmedMotion Detect Sensitivity Alarm Input Armed / IO Linkage on Alarm Pins 1 Output 2 Output 3 Alarm input 4 Input GND Send e-mail on AlarmIO Pins for IO Alarm Linkage Upload Image on AlarmSound on Alarm Record on AlarmREC Automatically and Save to PC Path Settings Server Push Mode For Safari, FireFox, Google Browser Sign in mobile phone Frequently Asked Questions Only see black screen or unusual code when remotely logged Can’t find multi-device settings and record iconCamera cannot connect wirelessly UPnP always failsProblems with network bandwidth Default ParametersThere’s no picture Problems with ActiveX Controller Default network ParametersSpecifications X10 Wireless Technology, Inc. Limited One Year Warranty FCC Caution