X10 Wireless Technology XX34A user manual Specifications

Page 57

5.SPECIFICATIONS

Model			XX34A
Image Sensor
Sensor			1/4” Color CMOS Sensor
Resolution			640 x 480 Pixels (300k Pixels)

IR Lens			f: 6mm, F 2.0	(3.6mm lens optional)

Viewing Angle			60 Degree	(3.6mm lens is 90Degree)

Minimum Illumination			0.5Lux @ F2.0

Video/Image Setting
Video Compression			MJPEG
Video Frame Rate			15fps(VGA), 30fps(QVGA)

Resolution			640 x 480(VGA), 320 x 240(QVGA)

Flip Mirror Images			Vertical / Horizontal

Light Frequency			50Hz, 60Hz or Outdoor

Video Parameters			Brightness, Contrast

	Audio talk-back		Built-in Mic
Communication
System Interface			10Base-T/100Base-TX Ethernet Port
Supported Protocols			TCP/IP，DHCP，SMTP，HTTP，DDNS，UPNP，PPPoE, FTP, DNS, UDP, GPRS
Wireless LAN			Supports wireless networks (Wi-Fi/802.11/b/g)
WEP Encryption			Disable / 64 bit / 128 bit
WPA/WPA2 Encryption			TKIP / AES
Physical / Environment

Power Supply			5VDC/2A External Power Adapter
Power Consumption			5W (Max.)

Operate Temperature			0°C ~ 55°C	(14℉~131℉)

Operate Humidity			20%-85% non-condensing

Storage temperature			-10°C ~ 60°C	(14℉~140℉)

Storage Humidity			0%-90% non-condensing

PC System Requirement
CPU			2.0 GHZ or above
Memory Size			256 MB or above

Display Card			64M or above memory

Supported OS			Microsoft Windows 98/ME/2000/XP/Vista/7

Browser			IE6.0, IE7.0, IE8.0, Firefox, Safari, Google chrome etc

Certification			CE, FCC, RoHS

Warranty			Limited 90 day warranty

57

Image 57

Contents Indoor Wireless/Wired IP Network Camera Model XX34A Contents Packing List FeaturesProduct Views Wireless Antenna WI-FI AntennaFront View Infrared LED 10 LEDsBottom View Rear PanelSoftware Installation Hardware InstallationSystem configuration requirements PC System RequirementsActiveX Double click Appinstall.exe-Next-Install-Finish Page IP Camera Tool Six OptionsRefresh Camera List, Flush Arp Buffer, About IP Camera Tool 1 .1 Basic Properties Network ConfigurationPage Upgrade Firmware Camera LoginRefresh Camera List Flush Arp BufferDefault user name is admin, no password leave blank For IE Browser Choose ActiveX Mode For IE Browser, and signPage For Safari, Firefox, Google Browser ActiveX Mode For IE Browser For Mobile PhoneFor Visitor Channels Settings Status of ChannelsRate and Resolution OSD SettingsTOP Menu For Operator Audio Video SettingsPan/Tilt Control Mode, Bright, Contrast SettingsPreset Settings For AdministratorSet Multi-Device in LAN Multi-Device SettingsPage Set Multi-Device for WAN Page Upgrade Device Firmware Basic Network Settings Network SettingsRestore Factory Settings Reboot DevicePage Wireless LAN Settings Page Adsl Settings UPnP SettingsClick UPnP Settings to choose Using UPnP to Map Port Ddns Service Settings To change the camera’s port Third Party DdnsChoose Forwarding, select Virtual Servers Set Port Forwarding in the routerChoose Advanced, select Virtual Servers Choose Firewall, select Virtual ServersStep LoginSystemDevice Info System SettingsAlias Settings Date &Time SettingsDevice Info Users Settings Backup & Restore Indicator SettingsClick System-Device Info to check the MSN status Mail Service Settings Other SettingsPage FTP Service Settings Motion Detect Armed Alarm Service SettingsMotion Detect Sensitivity Alarm Input Armed / IO Linkage on Alarm IO Pins for IO Alarm Linkage Send e-mail on AlarmPins 1 Output 2 Output 3 Alarm input 4 Input GND Upload Image on AlarmSound on Alarm Record on AlarmREC Automatically and Save to PC Path Settings Server Push Mode For Safari, FireFox, Google Browser Sign in mobile phone Frequently Asked Questions Camera cannot connect wirelessly Can’t find multi-device settings and record iconOnly see black screen or unusual code when remotely logged UPnP always failsThere’s no picture Problems with ActiveX Controller Default ParametersProblems with network bandwidth Default network ParametersSpecifications FCC Caution X10 Wireless Technology, Inc. Limited One Year Warranty