Safety Instructions

Protect the ﬂash equipment against moisture, condensation, heat, sand and dirt.

Profoto generators and ﬂash heads are part of a complete professional lighting system. Please read the instruction manual carefully before use. Flash tubes and modelling lights emit considerable heat and can be dangerous if not used properly. Always unplug the lamp cable from the generator before changing modelling light, glass cover or ﬂash tube. Under no circumstances are generators or heads to be opened! There is high voltage inside

.the generator! Service is only to be carried out by authorised personnel.

Never connect accessories of other brands without consulting an

.authorised service station.

.Do not touch hot glass or metal parts.

.Do not obstruct ventilation.

.Do not connect the lamp head with the transport cap in place.

Never place ﬁlters or diffusing material directly onto glass covers, ﬂash tubes or

.modelling lights.

.Never position the light extremely close to people.

When mounting umbrellas, do not touch ﬂash tubes or modelling lights

.with the metal shaft – risk of high voltage.

.Always use a grounded power supply/mains outlet.