ProHead, Available | Profoto Pro-7 specs

ProHead

The modelling light is turned on and off with the black switch

[1]at the back of the head. The built-in fan can easily be switched between continuous and thermostat-controlled operations [2]. Please note that when changing modelling light, flash tube or glass cover the lamp cable must be disconnected from the generator.

The modelling light has a mini-can socket (E11). The ﬂash tube has two metal pins. When removing a ﬂash tube, pull it straight out of the sockets. When inserting a new ﬂash tube, check that the trigger-wire clasps properly around the ﬂash tube (please see mounting instructions in package). When mounting the glass cover, check that both locking springs connect properly into glass cover holes. In case the head overheats the modelling light automatically switches off. When the temperature has dropped sufficiently the modelling

1	light will switch on again. At the back of the head there is an
1
	opening for attaching accessories such as ﬁlters and barn doors.
2	There are glass covers for different colour temperatures
	available.
3	Loosening the handle [4] can easily alter the ﬂash head posi-

4tion. An umbrella can be mounted in the umbrella holder. The ProHead is normally delivered with a 250W modelling lamp but can be equipped with a 500W lamp if using the longer (100mm) glass cover used on the ProTwin.

10.15.33Glass Cover, frosted, UV-coated (standard)

10.15.34Glass Cover, frosted, uncoated, + 300° Kelvin

10.15.35Glass Cover, frosted, extra UV-coated, - 300° Kelvin

10.15.36Glass Cover, clear, uncoated, + 300° Kelvin

10.15.37Glass Cover, clear, UV-coated

ProHead

available.