ProTwin

or glass cover the lamp cable must be disconnected from the generator.

The modelling light has a mini-can socket (E11). The ﬂash tube has two metal pins. When removing a ﬂash tube, pull it straight out of the sockets. When inserting a new ﬂash tube, check that the trigger-wire clasps properly around the ﬂash tube (please see mounting instructions in package).

When mounting the glass cover, check that both locking springs connect properly into glass cover holes. In case the head overheats the modelling light automatically switches off. When the temperature has dropped sufficiently the mod- elling light will switch on again. At the back of the head there is an opening for attaching accessories such as ﬁlters and barn doors. There are glass covers for different colour tem- peratures available.

Magic arm

Fits ProHead, Pro-7b head and ProTwin. Filters and Barn Doors can be attached.

Handle

Fits ProHead, Pro-7b head and ProTwin. Makes it easier to manoeuvre lamp heads when using soft boxes. (Included with all ProHeads)

ProTwin cont.

10.15.32Flash Tube, uncoated

10.20.07Modelling Light 500W, 120 V, mini-can socket (E11)

10.07.09Handle for ProHead, Pro-7b head and ProTwin