Pro-7s 1200/2400 Generator
Brief Instructions
•Connect the generator to the mains supply with the enclosed power cable [1]. The green lamp [3] should now light up indicating acceptable AC current to the generator.
•Connect the lamp head(s) to the socket(s) [2].
•Use the control MOD. LIGHT [12] to choose modelling light mode.
•Press the button [4] ON to start charging. The white ready lamp [9] flashes the first time the generator is charged indicating that ”dumping” of energy is needed.
•Choose the desired energy output with the ENERGY control [5]. For full energy choose 1/1.
•Press the test button [9] to dump the energy. The generator is now charged to the chosen energy and the white ready lamp/test button [9] will light up.
•Connect sync cord and/or flash meter to the sync sockets SYNC [7].
•Activate the
•Activate the audible signal by pressing the button SOUND [10].
•For normal recharging speed, press the FAST [11] button.
Mains Connection
Use the included power cable to connect to the mains power supply. The generator can be connected to all common mains voltages
(Please also see ”Gas Generator” on page 32).
Warning: Never use ordinary household extension cords to elongate the power cable.
27