Pro-7b Generator
Brief Instructions
•Connect the desired number of lamp heads to sockets A & B.
•Start charging by pushing the button ON [12]. The ready lamp [8] will light up when the generator is fully charged.
•The generator can be activated from OFF position by means of a sync signal from a camera.
•Choose the desired energy distribution with the control MASTER [13] and the SYM/ASYM switch [2]. The generator will automatically dump if the energy level is lowered.
•Connect sync cord and/or flash meter to the sync sockets SYNC [6]
•Activate the photocell [5] by pushing the button SLAVE [7].
•Activate the audible signal by pushing the button SOUND [9].
•Pushing the button MOD.LIGHT [11] turns on the modelling light, which will stay on for 20 seconds. To have the modelling light stay on for a longer period of time push the button two or three consecutive times, which will give 40 and 60 seconds respectively.
•Choose fast recharging by pushing the button FAST [10].
•The charge indicator [3] shows the battery charge level.
•Turn off the generator with the button ON [12]. The generator automatically turns off after 30 minutes when not in use.
Battery and battery charging
The battery can be charged through the mains outlet by using a special charger or charged directly from the car cigarette lighter when driving. The charging time this latter way is only 3.5 hours. The generator can be used during charging. The generator cannot be used without a battery in place. The battery will not deteriorate from being charged frequently or from being charged when not fully discharged. Neither does it need to be fully charged before using it. The actual battery life is in fact elongated when fully recharged. The battery indicator shows the charge level and is
10.02.18Multivoltage Charger incl.adapters,
10.02.19Charger (12/24V) for Car Cigarette Lighter, 3.5A, 2.5 hour charging
10.02.21Battery
10.02.23Cassette for Battery
90.07.26Battery incl. Cassette
90.07.28universal power adapter for 2.5 hour charging, The adapter accepts a wide range of input voltages:
35