Chapter 3. Installing Camera & Network Setup
② Port Setup
|
| 80 |
| |
|
|
|
| |
Category |
|
| Description | |
Port Setup | Select a service port; | |||
the default is 80. | ||||
| ||||
Notes When a device is connected to a cable or xDSL modem, its IP address keeps changing each time it attempts to connect to the ISP (Internet Service Provider) so you cannot check the new IP address of the device.
DDNS is useful for situations like this, involving products with dynamic IPs. You can easily check the new IP address of your products by registering them to our DDNS server at www.samsungipolis.com. To use the DDNS service, first register the product to the DDNS server. Come back to this page, select Enable under the Use DDNS option, and then enter the ID and password that was submitted to the DDNS server. For more information, please refer to Page 50: “Using DDNS.”
Chapter 4. Using Web Viewer
4.1. Using Web Viewer
4.1.1. Login
Enter the IP address of your camera in an internet browser, and then press Enter to connect to the Web Viewer login page.
Enter your user ID and password, and then click <Login> to move to the next page.
Notes The default administrator login information is ID: admin, and PW: 11111111.
The <Guest> button can be used for access only if the Guess Access option is checked in System → User → Guest Setup.
Notes | Please change the password of your administrator account upon the first login. |
| It helps you prevent unauthorized users from connecting to the administrator page. |
|
|
NETWORK PTZ CAMERA 34 User Guide | NETWORK PTZ CAMERA 35 User Guide |