Chapter 4. Using Web Viewer
other power interruptions.
Turbo Enable
This function accelerates the speed of the PTZ operations in proportion to the period for which the PTZ button is pressed.
For example, hitting the PTZ button once activates the operation at slow speed, but the speed increases so long as you are holding down the button.
■OSD Setting
Camera ID : Displays or hides the ID of the current camera on the screen.
Sequence Status : Displays or hides the status of a sequence action that is in progress.
PTZ Position : Displays or hides the status of the Pan, Tilt, and Zoom operation that is in progress.
■Initialize
Camera Default : Use this function when replacing the camera’s zoom module; uploads the settings of the previous module to a new module. Make sure to keep the camera turned off while replacing the module and then use this function.
Auto Refresh : Optimizes the electronic circuits and components of the camera on a regular basis. This function is useful to maintain and restore the current settings of the camera. Use it after the camera has been facing a strong light source directly for a long time, or when the settings have changed after the camera has repeatedly rotated to capture the video of an area over a long period.
-OFF, 1~7 Days : OFF disables Auto Refresh while 1 to 7 Days performs it at selected intervals.
※Auto Refresh takes approximately 10 seconds to finish. If Auto Refresh activates in the middle of a sequence action, the camera pauses the sequence action and performs an Auto Refresh, then resumes the sequence action once the refresh is complete.
■Status
Displays the settings and version of the dome camera.
-Cam Model : Indicates the model name of the camera.
-Protocol : Indicates the type of protocol that is used for the camera.
-Duplex : Supports one- and
-Baud Rate : Displays the selected baud rate.
-Data Bits : Displays selected data bits.
-Stop Bits : Displays selected stop bits.
Caution
•New settings are saved only if you click the 
button at the bottom of the screen.
The 
button cancels new settings.
4.2.1.7. Record
Use this menu to save image data to an SD memory card.
■Record Setup
Category | Description | |
Target Stream | Select a stream to save. | |
Pre alarm | Select a time to start saving an event prior to its occurrence. | |
Post alarm | Select a time to finish saving an event after its occurrence. | |
Selecting ALL saves all frames while 1fps saves only 1 frame per second. | ||
Frame Rate | ||
| ||
Selecting ALL saves all frames while 1fps saves only 1 frame per second. | ||
Option | ||
| ||
Overwrite | Deletes the oldest file and saves a new file when no free space remains in an | |
inserted memory device. | ||
| ||
| If an inserted SD memory card is not working or becomes | |
Warning Message | Overwrite option is not used, selecting this option displays a warning message on | |
| the screen. |
NETWORK PTZ CAMERA 58 User Guide | NETWORK PTZ CAMERA 59 User Guide |